My 2000r1 at times the shifter sticks n 2nd gear an wont go to 3rd gear at the same time its hard to down shift from 2nd gear back down to first
SOURCE: 2nd gear does not work on my Yamaha Virago xv250
Sounds like a slightly bent shift fork. The slider gear isn't quite engaging into 2nd. If the bend gets worse then you won't get into first and the pedal will get real stiff in those gears. The repair is best done in the shop.
Please rate this solution. Thanks!
SOURCE: my banshee wont shift past 2 gear
You have a bent shift fork. The repair means taking the engine out of the frame then removing the top end, removing the flywheel and electrics, removing the clutch , shift mechanism and kick starter and a few other parts. THEN you are ready to split the gearbox to remove the gears and crankshaft and then the shift drum and bent shift fork. Next you get to put it all back together. This is a pretty big job for the home mechanic.
You will need an impact driver, flywheel puller, case splitter and torque wrench plus the normal screwdriver, pliers, etc.. Alternate to the special tools is taking it to the dealer and say "Fix it".
I normally tell people to take it to the shop just so they don't get into such an involved project.
Free service manual PDF download at > http://www.carlsalter.com/motorcycle-manuals.asp
Please rate this solution. Thanks!
SOURCE: The trans is stuck in 3rd gear. wont shift
sounds like the shift lever shaft broke internally. if you know enough to take it apart and repair yourself, you will firure out how the gearing works. also check shifting forks for defects, make certain thier not bent or this problem will happen again.
SOURCE: Transmission problem in E230 Benz
What you need to check is the transmission release bearing because if there is a clearance on the release bearing you will encounter this problem and also check the transmission oil.
I’m happy to assist further over the phone at https://www.6ya.com/expert/ramy_d9e7ebea3891f482
SOURCE: hi, I have a 2001 suzuki gsxr 600 and it sometimes
You need to have your gear box checked, it might be a press or clutch but it needs to be opened to sort out this problem.To start try to see if you can increase the tension of the clutch and if not lucky then you have no other choice but to open the gear box.
93 views
Usually answered in minutes!
×