How to relocate front signal lights from handlebars to forks on my 2006 Fatboy
Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected]. Good luck and have a wonderful day.
https://www.hdforums.com/forum/softail-models/166850-fatboy-turn-signal-relocation.html
http://www.mediafire.com/file/bueyzhc4oxaz3g1/2006+Harley+Softail+Service+Manual.pdf
https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://serviceinfo.harley-davidson.com/sip/service/document/6300
https://www.6ya.com/ to speak to me personally
SOURCE: front turn signal relocation on 2009 HD crossbones
easy job , takes about twenty mins or an hour for perfection. instrutions are good in the pack from jp.but here goes ; remove each light from bars using allen key ,cut wire at about 4" from indicator, remove dog bone from indicator and fit new bracket and bolt , tighten to the point that you can twist the light if you have to for leveling them when finished,next remove lower fork bolt and install light complete with new bracket on to fork with new longer bolt tighten to spec. same sequence for other side .now you have the job of reconnecting the wireing with crimps and heat shink sleaving.if you still need a picture pls email [email protected]
SOURCE: i have to relocate the rear turn signals on my
HD has a relocation kit available for this...JP Cycles should have it as well. The kit comes with instructions on how to do it.
SOURCE: fork oil do I need in each on a fatboy
ten ounces in each side . Make sure they are drained completely to avoud overfill
SOURCE: relocating front turn signals on 2009 Fat Boy
front turn signal wires should be routed down the right side of the backbone of the frame under the gas tank. they will be violet and brown wires along with 2 blacks for grounds.
SOURCE: removing stock rear turn signals on 2006 Harley Davidon 1200
I have not removed the turn signals from a model this late. There may be a nut between the fender and the fender strut. You may have to remove the fender to get the turn signals off.
663 views
Usually answered in minutes!
×