Can you split a dt360 tacho to replace the glass

You just remove the door, undo the handle and screws and split it. Clean with Easy Off, rinse, dry and reassemble.

Google

make model replace door glass

https://www.google.com/search?q=how+to+replace+inner+glass+on+bosch+oven+door

'Make Model (what it is)' in all questions please.
..

Yes of course. Just click the link below


https://www.repairclinic.com/ProductDetail/188688

you have an in cluster factory engine tachometer (RPM)?
the tacho is meter in the cluster and does not use speedo parts or its cable.
its just a meter that needs power, ground and spark tacho signals
if all 3 are good, the meter is bad. period.
the tacho signal goes to the ignition coil minus lug, and will good, as engine runs. so... wires bad, to tacho or tacho bad.
ever price a new one? or even used? $100 used?
you willing to pay that much for just a factory tacho?

there is NO speedo cable. this old 93 is electronic, (rare on most 93 cars made, toy is advanced)
here is the proof, amazing how books dont lie....
there is a speed sensor.
the tacho and speedo use the same power and ground
leaving just one wire,r-g red-green RPM sig. pin 5 of cluster
an is SPARK primary sig. so if only tacho is dead.
then the tacho is bad, or that pin 5 wire is dead.
got you to just 2 possibles.

Hi.

The part (or the glasses) must be replaced. Cheap repair done with superglue is not a good solution. Please contact Nike customer support using the link below:

Athletic Sport Sunglasses & Technology ' Nike

I believe the fuelpack uses the tach signal in its operation. For some reason yours is not passing this signal thru to the tachometer. I'd get in touch with the manufacturer. I'm not sure if there is some setting that can turn off/on the signal pass thru, or that your fuelpak is faulty.