Suzuki Motorcycles - Page 8 - Recent Questions, Troubleshooting & Support

0helpful
1answer

My left side of GS 500 Suzuki is not firework

Keep fireworks well away from any side of your bike. Gasoline is highly inflammable.
11/29/2022 1:26:14 AM • Suzuki... • Answered on Nov 29, 2022
0helpful
1answer

1977 Suzuki GS750 vacuum line to petcock acting weird.

You should correct those exhaust issues because a exhaust leak can cause the issues you are having.
11/26/2022 1:27:03 AM • 1977 Suzuki GS... • Answered on Nov 26, 2022
0helpful
1answer

2003 Suzuki GSX-R1000. My Suzuki 2003 Suzuki GSX-R1000 2003 F1 indicating a light. Engine not starting?

Question edited for clarity. Engines only need three things. Clean fuel supply. A spark at the right time. Compression. https://www.google.com/search?q=2003+Suzuki+gsx+r+1000+model+won%27t+start ..
11/25/2022 7:57:41 PM • Suzuki... • Answered on Nov 25, 2022
0helpful
1answer

06 suzuki ltr450 when let clutch out it starts to move then dies, also when shift to neutral it is actually in gear.

Hi, it sounds like you would need to update your shift-related gears. If the car can start, then your starter, battery and alternator are fine. You might have to get your tire axels checked as well as an issue with those can also affect movement of your vehicle. Thank you.
11/23/2022 5:05:49 AM • Suzuki... • Answered on Nov 23, 2022
0helpful
1answer

Where can I download a Suzuki s83 1400 repair manual

https://www.carlsalter.com/suzuki-service-manuals.asp -------------------https://www.repairmanual.com/product/official-1987-2008-suzuki-vs1400-intruder-volusia-boulevard-s83-factory-service-manual-99500-39159-03e/
11/20/2022 3:33:18 PM • Suzuki... • Answered on Nov 20, 2022
0helpful
4answers

'bogging' down in low gear

your carbs will need a good service ,pinning the throttle wide open wont help either ,so open throttle slowly. I expect your needle valve in the carb has gone oval ,it should be round allso check the needle condition no scores, but first clean and adjust your pilot screw,best thing is to get a haynes manual to find the proper setting for it,but quite simple to do.
11/16/2022 3:13:41 PM • 1993 Suzuki GSF... • Answered on Nov 16, 2022
0helpful
1answer
0helpful
1answer

Suzuki vz 800 marauder 2001

Clogged fuel petcock or dirty fuel filter.
11/9/2022 10:52:36 PM • 2001 Suzuki VZ... • Answered on Nov 09, 2022
0helpful
1answer

2005 Suzuki GS 500 has intermitted surging, conked out started after 5 mins. Any help please?

Question edited to add maker. Question moved to category. Surging is normally because of air leaks in the inlet manifold, too much air.
11/9/2022 6:19:42 AM • 2005 Suzuki GS... • Answered on Nov 09, 2022
0helpful
2answers

Front cylinder not as hot as rear cylinder and backfires

change candle, and regulate the carburetor. the excessive gasoline in coming damage the candles.
11/7/2022 8:58:44 PM • Suzuki... • Answered on Nov 07, 2022
0helpful
1answer
0helpful
1answer

2007 Suzuki drz400sm fuse box location

not told what is dead, why? skip the #1 evidence. what if there is fuse for what is dead. lost the user guide and google 1st hit is there. https://www.manualslib.com/products/Suzuki-Drz-400-2007-5904324.html page 198 (real) shows ID 16 as FUSE box, google found it in 1 second. the arrow seems to point to tail end, under seat rear or left rear side cover, why not just follow the harness main to it. be so easy on any motor cycle. its in the rear somewhere, look more carefully says behind battery 15 box-undefined-undefined-0.jpg
11/7/2022 1:22:49 PM • Suzuki DRZ 400 S... • Answered on Nov 07, 2022
0helpful
1answer

1992 Intruder 800 VS.. I have coolant leaking out of frame..I want to insert a hose through the frame for the coolant flow..what size and type of Hose should I use?

The best size and type hose to use is the same as what was used in the radiator. Your local auto parts store will have it. If you need more help with this, let me know. Good luck. ... 1992 Suzuki VS 800 Intruder The best size and type hose to use is the same as what was used in the radiator. Your local auto parts store will have it. If you need more help with this, let me know. Good luck. ...I am having a problem with coolant leaking out of the overflow. I have checked the radiator, water pump and hoses. No leaks there. I have 2 theories. First theory is the head gasket. I have not checked that. The other is the thermostat. When the coolant is cold the overflow is almost empty. When it gets hot the overflow is full. I have replaced the coolant and the overflow is full again. Any ideas?More than likely the thermostat is not opening up, when the coolant gets hot and the engine is running, the thermostat should open and the coolant should flow from the radiator to the motor and back, causing the overflow to empty out, now when it gets ... 1995
11/5/2022 1:22:38 PM • Suzuki... • Answered on Nov 05, 2022
0helpful
2answers

400 Eiger ATV, starts and runs fine, stalls the

If 2 stroke check crank seals, check plug cap for proper resistance,check for good fuel flow to carb.Spark should jump at least a 1/4" gap,NOT JUST the .030 or plug gap.
10/30/2022 9:00:33 PM • 2004 Suzuki DR-Z... • Answered on Oct 30, 2022
0helpful
1answer

2009 Suzuki Boulevard C90T excessive vibration@

People resurrecting posts from 2013! You think he still has the bike and needs this fixing?
  • T Miner Sep 03, 2017 Try experimenting with the octane level of your gas. Might help.
  • johnny bonacci Sep 03, 2017 check for loose motor mounts or a loose exhaust.
https://www.google.com/search?q=2009+Suzuki+Boulevard+C90T+excessive+vibration ....
10/26/2022 11:31:16 PM • 2009 Suzuki... • Answered on Oct 26, 2022
0helpful
1answer

2006 Suzuki Burgman won't start. It has gas in the oil.

Question edited for clarity, 'want', changed to 'won't'. Who put the gas in the oil? How do you know there is gas in the oil? The two systems don't meet unless you have an injector pumping raw gas into the cylinder bore? https://www.google.com/search?q=2006+suzuki+burgman+won%27t+start ..
10/26/2022 11:29:09 PM • Suzuki... • Answered on Oct 26, 2022
0helpful
1answer
0helpful
1answer

Suzuki Intruder VS 800. Ignition button is frozen. I can't get start switch to click on, no starting noise or engine crank.

Question edited for clarity. Question moved from Cars and Trucks to Make Model category. It appears to be a known issue. https://www.google.com/search?q=Suzuki+Intruder+VS+800.+Ignition+button+is+frozen ..
10/23/2022 11:33:11 PM • Suzuki VS 800... • Answered on Oct 23, 2022
0helpful
1answer

Where is the choke on

I don't know where your choke is physically located. I would say to you, follow the cable to find the choke and I say it will be on the carb or very near it in the air supply channel.

Function of the choke is to restrict the supply of air thereby making the fuel mix more rich (relatively more gasoline to air) for easier starting.

I think you will find the choke easily. Whether you can easily manipulate it directly instead of via the remote location - different question. My guess is it will be difficult to operate. Make your riding experience pleasurable, replace the broken parts. Find parts at your Suzuki motorcycle shop or at a FixYa.com advertiser. Look around this page for advertisements for Suzuki parts.

Thanks for your question. I hope I have been of some assistance to you today.
10/23/2022 3:07:48 PM • Suzuki GSX 600 F... • Answered on Oct 23, 2022
Not finding what you are looking for?
Suzuki Logo

16,018 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...