2003 Yamaha YZ 125 - Answered Questions & Fixed issues
Need to adjust the clutch internally
Hi,there is no adjustment from inside the clutch caseing,you can only replace the clutch plates and springs,all other adjustments are done by the cable.
SEIZED PISTON
excessive piston clearance.really needed bore job with oversized piston,not just honed and rings.measure piston to cylinder clearance,check spcifications and verify
1976 yz125c jumping into gear from neutral.
wear or play on the gear selector drum,could even be the gear selector plate on the end of the drum is loose its star shaped with a central bolt or screw,check the locator spring also.
How to take off a kick start
it should be just a bolt that goes through the base of kickstarter then wedge a screw driver into the slot to widen it and it should come off .but if you want to remove the shaft and all you will need to split the cases hope this helps
Not finding what you are looking for?