20 Most Recent 2005 Harley Davidson FLHTCUI Electra Glide Ultra Classic Questions & Answers

Liquid contamination. Time for a new screen.

Duplicate question already answered

The bike was running on Tuesday parked it come out day before yesterday to start it it will not start and it keeps blowing the EMC fuse has no power anywhere else on the bike the radio has kicked on twice other than that there has been no power to the bike

Sounds like you have shorted wire(s) underneath the fairing where most of the wiring is located. If you have had work done on the bike lately like radio installed, etc, many times the cause lies in bad routing of wiring. Left turn signal is selected from handlebar switch, tach I believe is fed off aux fuse when key is on while the lights inside it are wired to light circuit. Do a visual inspection of wires , usually turns up wires routed wrong.

Front axle nut torque 70-75ft lbs, rear axle cone nut first torque 15-20ft lbs, second torque 95-105 ft lbs, front disc torque 16-24 ft lbs, rear disc torque 30-45ft lbs.

Codes are indicative of the crank sensor. I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_5bac37c3cb991fdb