20 Most Recent 2007 Yamaha Majesty 400 Questions & Answers

Couldn't find anything on line about how to get the rider seat off. And you can't get to other screws to get side panels off without first getting the seat off. I finally made a tool that made it pretty easy to get out the two big allen head bolts that hold the seat hinge to the frame. Cut two 1/2 inch segments out of a 6mm allen wrench and used needle nose pliers to put them into the tops of the allen head hinge bolts. Then used a 6mm box end wrench to loosen them. They are very tight so the box end of the wrench is needed to break the locktight loose. Once loosened a turn or two change to the open end of the wrench to speed things up. Once you raise those allen bolts up about 5/8", you can lift the seat hinge up enough to loosen the 10mm hex head bolts on the sides of the hinge with a box end wrench. Don't drop the 10mm bolts though because they can fall down onto the tank near the fuel pump and you will not get it back unless you strip plastic down to the top of the tank.

someones pinched ot lol has it got electric start like if not it might be a generator no battery so will have a cick start