20 Most Recent 2012 Yamaha YZF R6 Questions & Answers

0helpful
2answers

What's wrong with my 2012 yamaha R6 & how much is it going to co$t

sounds like the head gasket to me problem with all the r range of yamaha you have to drop the engine out to do anything really but before you do that run a compression check on all 4 cylinders if the compression is low on 1 or more cylinders it could be either your head warped (not so bad) or worst case a cracked liner (barrel) you can get the head gasket on ebay for around $40 but the main cost can depends on whether you have overheated the engine or not if it has overheated it can warp your head then the head has to be run to an engineering shop and have it skimmed if it is a cracked liner get a second hand engine but if you have not overheated the engine just replace the head gasket but personally i would still have the head checked out for cracks
4/12/2015 8:50:40 PM • 2012 Yamaha YZF... • Answered on Apr 12, 2015
0helpful
1answer

I have oil in my carbs

Does it blow. lot of air out of the oil filler cap if you take it off while its ticking over ?.if so t will be a cracked liner it's very common and I had one like that a few weeks ago.The cylinder liners crack and the burning gases whizz past it into the crankcase and then it pumps the burnt gases up the engine breather hose not the author.bad design fault that usually happens between 20'000 and 30'000 miles.
3/20/2015 10:21:09 PM • 2012 Yamaha YZF... • Answered on Mar 20, 2015
0helpful
1answer

I have a 2001 Yamaha Yzf r6. It’s been making this crazy winding noise on the left side of the bike, I just took off cover and checked behind it where the stator is. After further listening closely it sounds like it’s jn the gear box. The noise happens in neutral when I rev it and in gear as well. It just winds down as the rev does. Any ideas?

Could be literally anything. I know the timing chain tensioner is very common to wear out on those motors and cause a winding/ ticking noise but thats on the right side. Ive replaced several on those myself over the years. You can try to tighten it manually the slightest bit. If the noise goes away replace the tensioner don’t continue to drive it like that.
2/2/2019 4:06:54 AM • Yamaha YZF-R6... • Answered on Feb 02, 2019
0helpful
1answer

What is a yamaha r6 code 70

Tengo una yamaha r6r trate de ponerle un switch y los cables hicieron corto y dej? marcar la luz neutral y las luces delanteras y la moto no enciende quem? la ECU compre otra pero hace lo mismo si me pueden ayudar Por favor gracias ,,,,,,,,I have a yamaha r6r try to put a switch and the cables made short and left to mark the neutral light and the front lights and the motorcycle does not light burned the ECU buy another but does the same if you can help me please
12/31/2018 3:47:13 AM • Yamaha YZF-R6... • Answered on Dec 31, 2018
0answers
0answers
0answers
0answers
0answers
0answers
0answers
0answers
0answers
0answers
Not finding what you are looking for?
2012 Yamaha YZF R6 Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

YZF-R6 Yamaha

  • YZF-R6 Yamaha

Most Popular Question

wrong 2012 yamaha r6 much going co t

  • Motorcycles
Loading...