Husqvarna Motorcycles - Popular Questions, Answers, Tips & Manuals

1helpful
2answers

2006 Husqvarna TE-610 only has intermittent spark one.

If you have already replaced the flywheel, stator, and CDI, the next step would be to check the ignition coil and spark plug. It is possible that the ignition coil is faulty and needs to be replaced. Check the spark plug for any damage or wear and replace it if necessary. Additionally, make sure all the wiring connections are secure and free of corrosion. If none of these steps fix the issue, it may be best to take the bike to a mechanic or dealer for further diagnosis. They may be able to identify any other potential problems that could be causing the intermittent spark issue.
2/25/2023 3:12:22 AM • Husqvarna... • 863 views • 1 helpful votes
0helpful
1answer

My Husqvarna 125 LD shuts down when I let off of the throttle after it has been at full throttle?

Hi, Please double check that your air filter is not clogged and also check that your fuel is mixed properly. If those approaches fail, please call Husqvarna to provide a different approach at 1 (800) 487-5951. Thank you.
10/17/2022 4:58:20 PM • Husqvarna... • 36 views • 0 helpful votes
0helpful
1answer

2016 Husqvarna Enduro 701, Quickly gets hot and bogs down when accelerating. Perhaps a sensor?

Question moved from Cars and Trucks to correct category. I used to ride enduro, mind you, it was 50 years ago. I rode a Huskie 400 Automatic as a tester. Your overheating issue is well know on this bike! https://www.google.com/search?q=husqvarna+enduro+701+overheating ..
4/27/2022 2:28:40 AM • 2016 Husqvarna... • 113 views • 0 helpful votes
0helpful
2answers

2006 Husqvarna TE-450, Enduro Dual Sport. I need a CAM TIMING DIAGRAM please.

Question edited for clarity. Question moved to Husqvarna Motorcycle. click on the link. Also click the images tab. https://www.google.com/search?q=2006+TE450+cam+timing+marks ..
2/11/2022 2:41:31 AM • Husqvarna... • 68 views • 0 helpful votes
0helpful
1answer

Cam timing diagram for a 2006 Husqvarna Te450?

Try contacting Husqvarna or its distributor to inquire.
2/11/2022 2:28:02 AM • 2006 Husqvarna... • 64 views • 0 helpful votes
0helpful
1answer

K970 won't start after rebuild

My first thought is that is the primer bulb in the right way round as effectively, it is a one way valve New bulbs also fail to work properly. I reckon that is why they come in packs of 10 :>D Take it off, connect it to fuel and make sure it pumps. Also please note that we are not Husqvarna, we just have the category for easy filing.
11/29/2021 9:27:59 PM • Husqvarna... • 224 views • 0 helpful votes
0helpful
1answer

Husqvarna mtz61 dies when parking brake released.

Possibly the seat timer or other false operator not present.

Wiring diagram is in the operators manual, no cost download off the Husqvarna website or other.

Test, Don't Guess
11/4/2021 10:21:44 AM • Husqvarna... • 390 views • 0 helpful votes
1helpful
1answer

Husqvana 125 mototbike no spark

Need more info has the bike been out in the weather ? If it has unplug the kill switch and ignition switch try and see u get spark if u do clean one switch at s time with wd40 it will take the moster out and clean krosen out of your switches spry and work the switch on and off plug one in and see if u still get spark if u do unplug and try the other one if u dont get spark after u clean then u have a bad switch also check and clean all fuses i hope this helps u remember more info u give the more pple can help with your problem i hope this helps u
1/23/2019 1:10:02 PM • Husqvarna CR 125... • 161 views • 1 helpful votes
0helpful
1answer

Power valve 1998 Husqvarna WR 125

Husqvarna is a nice option, my cousin owns one and so far so good. I am going to take a look at the Motor Husqvarna 2022 and see if I can pick up one for my daily life. https://www.autofun.co.id/motor/husqvarna
12/15/2018 4:02:51 AM • Husqvarna WR 125... • 207 views • 0 helpful votes
0helpful
1answer

My 2006 Husqvarna 610 TE is not selecting first

Worn or bent gear selector.
2/7/2018 6:42:03 AM • 2007 Husqvarna... • 142 views • 0 helpful votes
0helpful
1answer

2008 Husqvarna SM 610 flat spot

carb malfunction would fit,if your bike was carbed.07 up sm's are fuel injected.check fuel delivery.filter screen clogged,weak fuel pump,fuel contamination.or electrical/sensor. good luck
10/9/2017 12:27:03 PM • 2008 Husqvarna... • 186 views • 0 helpful votes
0helpful
1answer

Hello, We had Trick Dual Sport upgrade our

..off - topic.. Where is this being held?? Please reply on here, thanks...
8/14/2017 7:51:03 AM • 2008 Husqvarna... • 80 views • 0 helpful votes
0helpful
1answer

My husqvarna rider 15 v2will not turn over

Does the engine spin freely, is the battery dead?
7/9/2016 6:11:37 PM • Husqvarna... • 80 views • 0 helpful votes
0helpful
1answer

86 husqvarna manuel wr 400 how to Adjust clutch

Clutch Replacement On A Motorcycle or Atv ... - YouTube

? 5:07 www.youtube.com/watch?v=br63PLcq3sU May 8, 2008 - Uploaded by Rocky Mountain ATV MC Simple instructions on how to replace the clutch on an off-road motorcycle or ATV. .... Hi I have a 05 drz400sm an I just did theclutch wire, tusk clutch ... I would start with the most obvious like properly adjusting your cable to ...
9/17/2015 12:51:53 AM • Husqvarna... • 325 views • 0 helpful votes
0helpful
1answer
0helpful
1answer

Hi I have a Husqvarna 1987 260cc it has but wont start what could it be?

Fuel issues, carb issues, secondary electrical system issues. Spark, fuel, compression & it will start. Start checking systems.
9/16/2015 2:12:07 PM • Husqvarna... • 137 views • 0 helpful votes
0helpful
1answer

What's the crankcase oil capacity on my 04 Husqvarna cr 125

Do you have a dip stick, or a sight glass?
9/2/2015 9:55:11 AM • Husqvarna... • 183 views • 0 helpful votes
0helpful
1answer

I have a 05 Husqvarna 510 and the rear brare does not work will you help me with it

Melvin what help are you after , advice online or in person
10/8/2015 2:34:34 AM • Husqvarna... • 58 views • 0 helpful votes
0helpful
1answer

I have got a 04 husqvarna cr 125 when it starts you put it in gear and it runs backwards what do i need to do to fix it

Believe it or not some two stroke engines can run backwards. I had this happen years ago on a Yamaha 100. Just restart it again and see if is running the right way. You also can try push starting it to get it to run the right way. Ok course this is assuming that this just happened and you have not just completed a major repair. My bike only did it one time and it never happened again. I hope this helps. Rod
7/25/2015 10:47:39 PM • 2004 Husqvarna... • 166 views • 0 helpful votes
0helpful
1answer

Does a 2012 husqvarna wre 125 engine fit in a 2005 frame?

Hi ! for an informantion please visit the website below. If you need more information about a specific electrical issue you can reach me at [email protected]://www.motorpartstore.com.Good luck and have a nice day. Motor Part Store Motor Parts Wholesale Shenzhen Too Star Technology Co Ltd dirt bike parts ATV parts
7/22/2015 7:48:23 AM • Husqvarna... • 83 views • 0 helpful votes
Not finding what you are looking for?
Husqvarna Logo

504 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Husqvarna Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66831 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...