Husqvarna Motorcycles - Page 4 - Recent Questions, Troubleshooting & Support

Both are adjustable. The forks have an adjustment screw. Press down on the front end while standing next to the bike. It should rebound fairly quick but it shouldn't start to go back down again on it's own (oscillates due to not enough damping). Adjust screws evenly on both forks (exact same amount) clockwise and repeat process mentioned until rebound is smooth and doesn't oscillate. The same applies to the rear but you have only one adjustment on the Ohlins reservoir for the monoshock assembly. Do the bounce test and adjust clockwise until the rebound feels firm and doesn't oscilllate. It should handle like a beast and wheelie much easier now.

Call these guys or check out their web site. They have manuals online and you can order anything from them. http://www.halls-cycles.com/

SMR's only hold about a liter. My 2007 SMR510 only held a liter of oil. Use the good stuff and change it often!!! I never went over 700 miles on oil.

Here is complete step by step photo instructions on how to tear down a 610 motor. http://www.supermotojunkie.com/showthread.php?60551-A-HOW-TO-610-Cam-Chain-Replacement

you may want to check your air fuel mixture. also check your vents and hosess if there may be any air leaks.

sound mad like you had a new plug

Kick the motor over it will be oppisite of fly wheel rotation

Not really a lot you can do to a cr50 apart from restrictions to its fuel and air mix...but I must warn you this will be at detriment to your engine....

Just try to ride slower or learn on something smaller and not as well set up ,,,,such as a midi Moto 50cc dirt bike

GO ON Line to a site called teckspark that site will have just about any manual you may need , for a price they costs $20 and under I get all my stuff from them. Goodl

It might be a good idea to contact the manufaxcturer or a dealer servce perosn and ask them for an answer.

Craftsman OEM List ' VintageMachinery.org http://vintagemachinery.org/craftsman/manufacturers.aspx%3Fsort%3D2 923, HEWLETT PACKARD. 934, HITACHI. 920, Hobart. 517, Homelite. 517, HOMELITE/JACOBSEN. 473, HOOVER. 484, HUNTER. 944, Husqvarna. 302, IBM.

go to sears online

30W.

searsparts.com

searsparts.com Consider getting a manual

Try disconnecting the battery, leave for a couple of minutes, the reconnect. If this does not work take it to a dealer to be checked.

has to be turned off by dealer. has an obd system and dealership has to turn it off.

most do but it depends on the make and mode of your pressure washer

it sounds like the starting capacitor that is stuffed try a new capacitor cheers

SAE10 W40 semi or fully synthetic oil, both work the same. Originaly used by Husqvarna