Honda Motorcycles - Page 4 - Recent Questions, Troubleshooting & Support
When my Honda VTX is hot it stops going
If your 2002 Honda VTX 1800 loses power to the wheels when it gets hot, it could be due to several potential issues. Here are a few possible causes to consider:
- Overheating: Check the cooling system of your motorcycle, including the coolant level, radiator, and cooling fan. If the engine is overheating, it can lead to loss of power. Ensure that the cooling system is functioning properly and that there are no blockages or leaks.
- Fuel delivery issues: When the engine gets hot, fuel delivery problems can occur. Check the fuel system components, including the fuel pump, fuel filter, and carburetors (if applicable). Make sure they are clean, free from clogs, and functioning correctly. If necessary, clean or replace these components.
- Ignition system problems: Heat can affect the ignition system, leading to weak spark or misfiring. Inspect the ignition coils, spark plugs, and spark plug wires. Ensure they are in good condition and properly connected. Replace any worn-out or damaged components as needed.
- Exhaust system obstruction: A partially blocked or restricted exhaust system can cause a loss of power when the engine gets hot. Inspect the exhaust pipes, mufflers, and catalytic converter (if equipped). Look for any obstructions, such as debris or carbon buildup, and clean or remove them.
- Clutch issues: If the clutch is not engaging properly when the engine is hot, it can result in a loss of power to the wheels. Check the clutch assembly, including the clutch plates, springs, and cable (if applicable). Ensure that the clutch is adjusted correctly and operating smoothly.
- Electrical problems: Heat can affect electrical components, leading to intermittent power loss. Inspect the wiring harness, connectors, and electrical connections. Look for loose or corroded connections, damaged wires, or faulty components. Repair or replace any problematic electrical parts.
- Engine performance issues: If none of the above issues are present, it's possible that there could be internal engine problems causing the loss of power. In this case, it's recommended to consult a qualified motorcycle mechanic or Honda dealer for a more thorough diagnosis and inspection.
Remember to follow proper safety precautions and consult the service manual for your specific motorcycle model during the troubleshooting process. If you're not confident in diagnosing or fixing the issue yourself, it's best to seek professional assistance to ensure a proper and accurate resolution.
5/20/2023 10:04:00 PM •
Honda...
•
Answered
on May 20, 2023
2007 Honda Shadow VT600C won't start have new battery and plugs, and coil pack, new fuel filter, velocity stack, rebuild carb, loose choke cable to the carb.
I'm sorry to hear about the trouble you're experiencing with your 2007 Honda Shadow VT600C. If you've already replaced the battery, spark plugs, coil pack, fuel filter, and performed maintenance tasks such as rebuilding the carburetor and checking the choke cable, there are a few more things you can try:
1. Fuel delivery: Check that the fuel pump is functioning properly and delivering fuel to the carburetor. Ensure that the fuel lines are clear and not clogged.
2. Ignition system: Verify that the ignition switch is in the "ON" position. Check the ignition fuse and wiring for any potential issues. Ensure that all connections are secure and clean.
3. Air intake and filter: Make sure the air filter is clean and not obstructed. Ensure that the velocity stack is installed correctly and not causing any air flow issues.
4. Compression test: Perform a compression test to check the engine's compression. Low compression could indicate a mechanical issue within the engine.
5. Starter motor: Check if the starter motor is engaging properly and turning over the engine. If the starter motor is not working, it may need to be replaced.
6. Wiring and electrical connections: Inspect all wiring and connections related to the ignition system, starter motor, and battery. Look for any loose or damaged wires that may be causing the starting issue.
If you've exhausted these troubleshooting steps and the problem persists, it may be best to consult a professional motorcycle mechanic or Honda dealership. They have the specialized knowledge and diagnostic equipment to pinpoint the exact cause of the starting problem and recommend appropriate repairs.
Please remember to exercise caution and follow proper safety procedures when working on your motorcycle.
Not finding what you are looking for?
