Toyota Cars & Trucks - Answered Questions & Fixed Issues
1999 Toyota RAV4. Where is fuse located for blower motor on 1999 toyota rav4 please?
1. LOCATE THE FUSE BOX: THE FUSE BOX IN A 1999 TOYOTA RAV4 IS USUALLY LOCATED UNDER THE DASHBOARD ON THE DRIVER'S SIDE.
2. IDENTIFY THE BLOWER MOTOR FUSE: LOOK FOR THE FUSE THAT IS LABELED OR MARKED AS "BLOWER MOTOR" OR "BLOWER FAN."
3. CHECK THE FUSE: ONCE YOU LOCATE THE FUSE, INSPECT IT TO SEE IF IT IS BLOWN. IF THE METAL STRIP INSIDE THE FUSE IS BROKEN, THEN THE FUSE IS BLOWN AND NEEDS TO BE REPLACED.
4. REPLACE THE FUSE: IF THE FUSE IS BLOWN, SIMPLY REPLACE IT WITH A NEW FUSE OF THE SAME AMPERAGE.
Toyota code p1750
Code P1750 on your Toyota denotes a problem in the Hydraulic Control System of A/T Clutch Pressure Control Solenoid due to a brake ECU malfunction. The signal is sent to the ECCM by the brake actuator assembly, aka skid control ECU for three seconds to display the code.
3/23/2024 5:01:08 PM •
Toyota Cars &...
•
Answered
on Mar 23, 2024
•
13,570 views
Toyota Camry 1991 Auto seat belt not working
Fortunately for you, there are a few ways how to get a seat belt buckle unstuck. To begin with, a seat belt can be stuck due to two reasons: a) the problem may lie in the retractor being locked, and b) dirt or grime may have accumulated on the seat belt, causing it to retract slower than usual and not all the way.
2007 Toyota Camry Le 2.4l. how do i put the ignition coil connetor wires back into the correct position? can you send me a wiring digram with color code?
I can guide you on how to reconnect the ignition coil connector wires correctly on your 2007 Toyota Camry LE 2.4L. Each wire should be connected to the corresponding terminal on the ignition coil.
Here is a general guideline based on the standard wire color-coding for most vehicles:
1. Start by identifying the ignition coil and the connector wires that you need to reconnect.
2. Check the wires for any color-coding. Typically, the wires are color-coded as follows:
- Black or Black with a White stripe
- Yellow or Yellow with a Blue stripe
- Blue or Blue with a Yellow stripe
- Green or Green with a White stripe
Here is a potential wiring configuration (please verify with your vehicle manual or a professional):
- Black or Black with a White stripe wire connects to the negative terminal (-) on the ignition coil.
- Yellow or Yellow with a Blue stripe wire connects to the positive terminal (+) on the ignition coil.
- Blue or Blue with a Yellow stripe wire connects to another terminal on the ignition coil.
- Green or Green with a White stripe wire connects to a different terminal on the ignition coil.
If your wires have a different color scheme, consult a repair manual for your specific vehicle or reach out to a professional for assistance. When reconnecting the wires, ensure they are securely attached to the respective terminals to prevent any loose connections or electrical issues.
I think this helpful
Can I change the tire width size on the same rims?
It is not unsafe to fit wider tyres as long as they are the same type on the same axle.
Many 'boy racers' fit wider tyres thinking it will give more grip.
I would take it to a garage and have the correct size tyres fitted as this will increase the accuracy of the speedometer as well, (due to the circumference being wrong).
Not finding what you are looking for?