SOURCE: iveco servicing
hi the axle is one of the few things that don,t fall apart on these vans but gearbox oils axless etc like engine oils need replacing regular if you want them to last i would change it every 50000 mile yates210456
SOURCE: reprogramming blank key iveco daily
Unfortunately there is no solution to this except to take it back to Iveco for reprogramming.
I am led to believe from my locksmith that there are two types of transponders generally put into cars and vans.
The first is a simple chip wtih a code which matches a code in the car / Van
The second is a chip which has a set of codes. They are read in order and the car / van remembers which one was used last. If you use the wrong code in the sequence then the car / van will ignore it and not let you start the engine.
The Iveco is unfortunately in the second group. If, like me, you snap your key, you can superglue a new key to the old and it works fine. The chip doesn't need to be "too" close to the barrel. Yes, it looks ugly, but it's much cheaper!
SOURCE: Valve clearances Toyota carolla
Hi,
the valves clearnces are: Inlet- 0.20 cold & Exaust- 0.25 cold.
Cheers
SOURCE: Valve Clearance
valve clearance, with engine hot, intake valves are .005-.006 in, exhaust valves are .011 in, if engine is cold then its intake .009-.011 in and exhaust is .007. hope this helps good luck.
SOURCE: what are the valve clearance settings for jeep
how set the valves for a 2001 jeep grand cherokee
685 views
Usually answered in minutes!
×