- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check you running light bulb.. some of those have two elements in them and one side could be blow inside the single bulb. The blinking is how the car tells you that you have a bad bulb, or maybe a short. Mostly likely it just a bulb.
It covers all under repair manual. I have visited this website 2-3 times for the repair of volvo v70 and vw manuals. They provide all kinds of manuals at a very cheap rates. Check it may be you will get something useful 1998 Volkswagen New Beetle Workshop Repair Service Manual PDF Download
My first thought would be a bad ground connection in the harness for the rear lights. You might want to take a test light and check the contacts in one of the sockets.
On my Jag the headlights had to be on and the engine running. Does your owners manual say anything about these requirements ? Have you checked the fuses to see if they have power ?
the brake lights don't light up or the taillights don't light up? the brake lights are brighter than the tailights so the tailights won't show up whenbrakes are applied. if no lights work when brakes are applied then check for a bad ground at the light assembly.
well first off lets clear a few things 4ways are wired in with the break switch not the turn signal switch so yes even if the turn signals dont work the 4 ways might and vise versa...
if this was a car in my shop i would first check the fuse, if thats ok check the multi funtion switch see if the signal is going out from there, I am sorry now if its the multi funtion switch they are $$$ to replace most of the time when i get this kind of problem in its the multi switch they have plastic tabs in them that push the contacts together and they break off and stop working, but then again if all your turn signals are not working its probly the fuse. post comment if you need more info
good luck
×