Head bolt torque specs for 200 honda accord 3.0

Go on your computer in your browser and type in '1990 Honda Accord 2.2 4 cylinder head bolts torque specifications'. You will get back the engine bolt layout with the bolts numbered with the torque specs. You tighten the bolts according to the numbers of the bolts in the order starting with number 1 and working to the highest number.

http://www.speedwayautoparts.com/index35.htm

follow link and click on torque tables and look up your vehicle, has most vehicles in their database

This information may be in the site already. May help but for 92 year spec's. Check the following link:

Head torque specs for 92 honda accord with f22a1

The 12mm head bolts torque to 15 ftlbs.
the 10mm head bolts torque to 9 ftlbs.
crosshatch pattern for the sequence.

Tighten the cylinder head bolts. Tighten the cylinder head bolts is sequence to 29 Nm (3.0 kgf-m, 22 ft. lbs.). Use a beam-type torque wrench. When using a preset type torque wrench, be sure to tighten slowly and do not overtighten. If a bolt makes any noise while you are torquing it, loosen the bolt and retighten it. Make sure the threads are clean, new heads bolts are best.

how mach tayp 2000 hona accord head bolt specs

Hello joee105,

The head bolt torque is a three step procedure:

1. 29 ft. lbs.
2. 51 ft. lbs.
3. 78 ft. lbs.

See image below for torque sequence.



I hope this helps.

Regards,

Jerry

The Head bolts are located below the cams, so you have to take the cams out to get to the bolts.
The torque specs for the head bolts in sequence is 20, 40, then end at 63ft lbs. Be sure to apply anti sieze or dip the head bolts in oil, before you torque them down or you might pull out the threads. (Not a good thing TRUST ME!)
Hope this helps.

the main bearings bolts is to 1st step 30Nm or 22lbs ft and the last step is 75Nm or 54lbs ft in this tighten secuence. 9 3 1 5 7 on the top bolts and........ ........ ........ ... 8 6 2 4 10 botton bolts and the connecting rod 45Nm or 34 lbs ft i hope be help you

bolts should be torqued in three stages from 29,51, and 78 ft lbs.