SOURCE: 98 chevy malibu:engine wont turn
Check with a battery tester if you have power at the starter, Are the Battery post clean, Are any fuses blown in the fuse Box, check for any corrision.
SOURCE: Where does the flasher go on a 98 chevy malibu
Replacement
The turn and hazard flashers are integrated into one flasher on these models. The flasher is located in the hazard warning switch and the hazard warning switch is located on the trim plate. Replace the flasher by unplugging the old one, removing it from the panel, and plugging in the new one.
Remove the bezel from the ignition switch
Carefully remove the instrument panel accessory trim plate.
To remove the trim plate, use a suitable prytool to carefully apply pressure at the retaining clip points . . .
. . . then gently pull the accessory trim plate away
Detach the electrical connector from the hazard warning switch.
Unplug the electrical connector from the hazard warning switch . . .
Unfasten the screw securing the hazard warning switch and remove the switch.
. . . then unfasten the screw securing the hazard warning switch and remove the switch from the vehicle
Installation is the reverse of removal.
Testimonial: "just what I needed, thank you so much."
SOURCE: My 98 Chevy Malibu v6 3.1 liter engine high idling
You probably have a large vacuum leak. With the engine running, listen under the hood for a hissing sound. Check all of the rubber lines running from the intake.
SOURCE: 98 2.4 chevy malibu water is getting in the oil
Timing cover gasket or timing cover cracked this is timming cover
If you need further help, reach me via phone at https://www.6ya.com/expert/justin_f1b4194bdc162d2e
32 views
Usually answered in minutes!
×