How do i take off belt to air condition and comprasion

a CEBBY Peek-uP
maker Felpro best not china no named belts. from fleabay or any thing with zon-e in the name
rockauto.com has all versions of it, makers, that are good.

if applicable,. the TTY bolts must be used, if there.
and set by angles. felpro page says they are TTY
torque to yield is TTY
check heads for warp-age first, per SM.
check deck for same, ,001" per foot max is industry standard.
if out of spec we mill it flat
and torqued down in sequence, per SM, TTY rules.
service manual = SM


https://www.rockauto.com/en/catalog/chevrolet,2002,s10+pickup,4.3l+v6,1384309,engine,cylinder+head+gasket,5412

What seems to be the problem ?
Can you not move the belt tensioner ?

if the pulley on the new alternator is different to the one that was on the original one you will have to change it,you may have to take it back to where you bought it & have it changed......hope this helps......cheers.

Your aircon could have a leak, needs checking out properly before you put more coolant in.

As things stand you could just be pumping CFC's into the atmosphere, enlarging the hole in the ozone layer giving New Zealanders skin cancer and more importantly wasting money.

http://www.2carpros.com/diagrams/geo/tracker/2002

The belt maybe to small.

check ti see that the chassis ground is intact and installed if that is not it check to see if the alternator belt is tracking properly and that the alt. is not out of alignment with the other pulleys.You may also need to have the electrical system checked for a power circuit in the car staying hot after the car is shut off.

the alternator gets turned by a belt and pulley. the alternator is the only part powered by the engine pulley system that has vents for air to get inside.and this one looks like its spewwing out rust. hope this helps. please rate me up ty^.^

I'll BET you have window visors or rain guards!
Look at the bottom of them as you drive air will go between the door and the guards and make a very nice squealing noise.

Lugnut61

you cant fix the belt, but can replace it. there are 2 belts on my charade 88. one is for engine and the other is for air-condition. Start your car and check which one belongs to engine and which one to air-condition. if you find the correct one, take a road. put it on the belt and move the belt. you can remove it easily. in the same manner you can place the new belt. But take care of your hands.