SOURCE: replacing headlight bulbs on a 2006 chrysler sebring
Behind the headlight you should see a eletrical wires running to the headlight section. There will be a 2 inch round plastic ring. You grap the back of the bulb and turn it to the right which will release the bulb and the socket. You pull out the bulb and replace it the same way. If this doesnt help then get back to me.
SOURCE: timing belt or chain
Ummmm woahhh hold up here...every 2.7 litre V6 i've been associated with had timing CHAINS. The chains ran the water pump and dual over head camshafts.
The 2.7l engine was manufactured by Mitsubishi for Chrysler and had an internal water pump with defective seals that allowed coolant to leak & mix with the oil causing severe sludging problems and eventual engine FAILURE...This has been a nightmare for Chrysler AND OWNERS !
MANY owners have contacted ISG Impartial Services Group 1-(866)332-3746 for a settlement with Chrysler
Attached is a cutaway view of the 2.7 litre, and as you can clearly see it is chain driven.
I've been a MOPAR enthusiast all my life...sadly, this engine was one of the worst to ever hit the streets.
Good luck Doug...i hope this helps.
SOURCE: how often do i replace the timing chain 1999
The belt is supposed to last for 105,000 miles. These sebring cars are notorious for breaking timing belts well before then. If your car has over 80,000 on it I would schedule a timing belt change in the near future. Don't be surprized if you have to also change the water pump.
Kelly
102 views
Usually answered in minutes!
×