Reversing lights will not go off on Hyundai trajet.anyone have idea to solve problem

SOURCE: MALFUNCTION INDICATOR LIGHT - HYUNDAI TRAJET

The SES lamp means there is a code in the ECM. Take to a pepboys or autozone, most of those places will check the code for free. Once you have the code, then we can diagnose the problem

SOURCE: its a hyundai trajet,aa said crankshaft sensor not

it is inside the timing cover in most cases with hyundai the timing belt will have to be removed so the crank gear can come off the sensor is usually behind the gear especially if it is a 6cyl if it is a 4 cyl then the wire goes behind the timing belt make sure the timing marks are lined up so when you reassemble it is lined up

Testimonial: "Thank you for the advices Ill get cracking on it"

SOURCE: Engine management system comes on hyundai trajet

depending on what code it is showing the problem could be occuring in the tranny the torque convertor could be trying to go out or a shift solenoid causing it to stall.

SOURCE: brakes making a grateing noise, working

brake shoes or pads worn out NEED URGENT ATTENTION

SOURCE: reversing light on my ford focus (51 plate) dose

the switch is in fact the earth when you select reverse it gronds the wire, so to test take lead off and earth it, there will be a contant live to the bulb with the ignition on, if when earthed the light works the fault is with the switch, which could be an adjustment problem, or a defective switch. if does not work when earthed check the live to the bulb then check fuse