The service and repair manual with diagram will provide you all the knowledge to fix the problem easily and you will get the manual from the given link https://toolsnyou.com
SOURCE: i have a 1997 hyundai elantra 1.8 i need torque specs. for head
go to http://www.hmaservice.com/ and register. After that, you'll have access to manuals, service bulletins, wiring diagrams, etc.
SOURCE: I need the cylinder head torque settings
4 steps, starting from center and doing the normal pattern. 30 ft lbs, then 44 ft lbs.
3rd step 1/4 turn
4th step addional 1/4 turn. Make sure you are using new bolts.
SOURCE: hyundai elantra 1.6GLS J2 torque settings
dear friend:here follows the settings in need:
cylinder head-30-35 nm + 30-35 + 65deg + 65deg.
mains-30nm +65deg
big ends- 1 - 26nm 2 - 52NM
fly-wheel -130nm
cam-sprocket - 100-120
crank-pulley - 170-180
cam caps -15nm
SOURCE: I need the torque settings
cylinder head bolts:
step one: 22 Ft-lbs.
step two: tighten additional 90 degrees
step three: tighten additional 90 degrees
118 views
Usually answered in minutes!
×