Here is a post with a video that should help you.
https://www.pacificaforums.com/forum/505-child-safety-car-seats/3866-remove-headrests-2nd-row.html
SOURCE: Add middle seat belt to make 3 seat belts on a bench seat?
I'll begin by saying I'm surprised there isn't a 3rd belt on a bench seat, but I think you are entering dangerous territory. There is an immense amount of engineering, testing, and development involved in seat belt systems. They are anchored very securely at points that are reinforced and designed to withstand a human body being thrown against the belt, transferring the energy to the anchors of the belts. So, besides being beyond the scope of being possible to install by your average mechanic, I shudder to think of the legal angle. If u were to be involved in an accident, and someone was injured or worse in that seat wearing the added belt, the lawsuit possibilities are scary. Having said all this, check with your local dealer, maybe the Durango is set up somehow for an extra belt, but I've never heard it before.
SOURCE: Removal of headrest on 2005 Ford F150.
The headrest has on obvious button to adjust the height and another button kinda hidden to remove the headrest. The black plastic ring at the base where the metal poles insert into the seat is where the two buttons. You probably noticed the obvious on that sticks out of the side of one of the rings. The other plastic ring contains a similar button that is not noticeable due to it being flush with the side of the plastic ring. Adjust the headrest to its highest position, then locate the "hidden" button on the other plastic ring and depress it while lifting on the headrest and it should come out.
SOURCE: HOW TO REMOVE 2000 DODGE CARAVAN REAR SEAT
There are 2 handles on the back of the seat where it attaches to the floor. If you hold the button on the handle and push it down it should release the seat from the floor. After this it just rolls out the back. Same for the middle seat if you need to remove it.
SOURCE: How do you remove the middle seat from a dodge
There's 2 latches in front on either side of the seat.Lift those up & rock the seat forward & lift it out. Might need 2 people. Reverse to install.
SOURCE: how to remove front rotors on 2008 dodge grand
You will need a big C clamp and a 21 mm socket.
Remove the wheel.
Use the C clamp to compress the front brake piston:
Just put the screw side of the c clamp on the outside brake pad and the frame part of the c clamp on the back of the caliper and turn the c clamp in until it won't compress further. You don't have to over-do it. Don't force it and don't do this with the back brakes...they require a tool that rotates the piston as it compresses... Hint: rent it from auto zone for free.
Once the piston is compressed, use the 21mm socket to remove the two caliper bolts and then tie up the caliper so it doesn't hang down in the way and stress the brake lines.
Then you need to bang on the rotor with a mallet until you free it and it will come off.
You may need to hammer it pretty hard.
That's it.
Assemble in reverse.
313 views
Usually answered in minutes!
×