Hooking up pioneer radio to a 96 grand jeep cherokee diagram

SOURCE: 96 Jeep Cherokee WON'T start

i just had the same exact problems as zeeladys. It was the crank sensor shorting out and causing the short to shut down circuits in the pcm, volt gauge, fuel gauge, no spark. Locate the connector to the crank sensor, it runs beside the distributor, with the key to the on position unplug the connector and see if the gauges come back on. If so, simply replace the crank sensor and ur off and running

SOURCE: 2005 jeep grand cherokee radio

It's in the engine compartment IOD#2. It's a black module with two fuses in it. Take that module off and replace the 20 AMP one.

SOURCE: serpintine belt

This link will take you to a picture of the diagram. If the link doesn't work contact me and I can email you the picture directly.

http://autorepair.about.com/library/illustrations/bl506a-lib.htm

SOURCE: 2003 Jeep Vacuum Diagram

THERE SHOULD BE A EVAP/VACUUM DIAGRAM UNDER THE HOOD ON A WHITE STICKER. SOMETIMES THEY ARE ON THE BOTTOM SIDE OF THE HOOD ITSELF. I HOPE THIS HELPS. PLEASE KEEP ME POSTED THANKS FOR USING FIX-YA AND FOR AN HONEST RATING/COMMENT. GOOD LUCK

SOURCE: 96 Jeep Grand Cherokee diagnostic codes P1762 and

governor pressure sensor in transmission is the likely problem