There may be an access hole plug at the bottom of the trim panel you can remove to insert a flat bladed screwdriver into the latch tommanually release it. If no plug there may be an intention in this area where you can drill a hole into the trim panel to insert a screwdriver. Then you can purchase a plug from a Chevy dealership to cover it up.
SOURCE: 2005 Suburban Liftgate will not open
HAVE A FRIEND PUSH ON THE GLASS WHEN YOU TRY TO OPEN IT THE NEXT TIME. THE LATCH INSIDE IS LOOSE AND NEEDS TO BE TIGHTENED. BY PUSHING ON THE HANDLE IN THE GLASS DOOR YOU CAN RELIEVE THE PRESSURE FROM THE LOCK AND OPEN IT THEN LOOK ON THE UNDERSIDE OF THE HANDLE IN THE GLASS THERE IS A SMALL METAL PEG WITH A NUT AT THE BOTTOM I THINK IT 7/16 OR SOMETHING LIKE THAT. TIGHTEN IT UP AND YOURE ON YOUR WAY
[email protected]
SOURCE: How do you release tension on serpentine belt for 2005 Chevy uplander
Typically, there is a spring loaded idler pulley that you need to put a wrench on and pull against the spring tension, which loosens the belt enough to slip it off.
309 views
Usually answered in minutes!
×