Why trust anyone try google Image for specs.. Make model year
Good luck..
SOURCE: 97 Ford Ranger 4.0L V6 Idles rough only when cold
Orand
Ther is a air Idle control valve located on the side of the throttle body. unplug it remove it spray it and clean it with carb cleaner replace it plug it back in and you will be a Happy person again.
Lugnut61
SOURCE: spark plug gap spec. for 1997 ford ranger/4.0 liter
for the most part it is under the hood of your car where the sticker say engine size try this website to see if they have you car listed its www.autozone.com if not call your local part store and tell them its a 4.0 liter and you need the gap on the spark plugs
SOURCE: torque specs for valve cover
not sure there is such a thing. I've never seen anybody use a torque wrench on valve cover bolts. Just use a nut driver (screwdriver type) or a 1/4 inch drive ratchet, and tighten as much as you can. They don't need to be very tight.
SOURCE: Need torque specs for oil pan bolts
torque specs for these bolts can be found in a Haynes or Chilton manual availiable from your local parts store, or maybe at your local library, however these bolts are usually no more than 14 ft pounds, unlike cylinder head bolts, the bolts do not need to have any stretch factor to hold the oil pan gasket in place or sealed.
91 views
Usually answered in minutes!
×