At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If it a factory fitted alarm, talk to your Kia dealership otherwise contact the alarm manufacturer for advice.
It would not be acceptable, on this forum, to discuss how to bypass your alarm as there are people that read this type of forum who may use the information for ******* purposes.
YOU CANNOT BYPASS THE SYSTEM,You must have the remotes recoded by a dealer.if you have the book try and reset the alarm.if not ask another question on this site and we will get back.
Hi there!It sounds like you may have a problem with the idle speed control actualtor.This unit adjusts air to air fuel mixture.Sometimes it can get covered with carbon and not work correctly.Try taking it off and cleaning it good with some carb cleaner.Then reinstall it and see if the performance is any better.If it is then you should replace it.Here is some info,hope it helps!Thanks It is the intake air control valve in the diagram below.
The idle speed control actuator maintains idle speed according to various engine loads and conditions. This component also provides additional air during startup. It consists of an opening coil, a closing coil and a permanent magnet. According to the control signals from the ECM, the valve rotor rotates to control the bypass air flow into the engine.
There are several configurations of the same security system. But one sure fire way to correct this issue is to get a bypass kit. Any shop that installs remote startups has the ability to bypass this system. Since the sytem measures the resitance of the key/lock and asociated wiring any shorting of those wires will make it very difficult to defaet without some expertise.
Sometimes the remote atart kit also includes the bypass, so you can get two for one here.
×