Hi I have a 1983 renault 5ts that I build up can you please tell me what the tappet clearance should be?

USA answer blind as a bat, me.
no year, told , no country told, (sold new to what country not told)

I had to read web pages in Hindi to find this.
ask Renault for he engine manual (service) a win.

specs, books and parts are all based on that
we can't just guess. it. not possible
all we can do is beg. endlessly.
that clearance spec is for hot and cold engine. both.
buy the service manual ? yet/ an not ask facts at every service point on the car forever>?
year 2015 to present says wiki,.
i guess you meant it has a (DOHC 4 valve head x3)
2 size engines:
799 cc and made by NISSAN, best I can tell.
999 cc
Petrol:
799 cc BR08DE I3
999 cc BR10DE I3
wiki does not cover those 2 engines.

sold in India,UK and S.AFRICa none here is USA or Id paste all steps to check and cure wrong valve LASH.


facts hard to find on those 2. super hard .

but here goes (gleaned by me max www web searched)

DOHC engines have to tappets. (a push rod name that)
some do have shims or mini lifters.
the cams sits in a cam rack over each banks of valves.
no rockers, no tappet, no HLA,.
direct DOHC cams. 1Liter
bingo bucket lifted. seen here, sorry no tappets (1960s name)
Yes lash matters on all engines lacking HLA's


https://youtu.be/8KfQcUISA-c?t=308


video :how odd all those hands and not one used a feeler gauge to check lash, to be in spec,. they are not HLAs'
if was HLA's head have primed them with engine oil first. (HLA= Hydraulic lash adjusters)

if the clearance is wrong here, ask maker Renault for a cure.(in there manual)

the Valve stem clearance changes only as valves fail and have valve to seat recession, and on some cars the buckets have shins inside that come an many sizes. ONLY THE SERVICE MANUAL tell that.

end DOHC facts, hard to find on Renaults. buy the manual and read it is always the answer,why guess?>

0.1mm inlet 0.25mm exhaust engine cold

May need more information like sub-model (es, dx, etc) and liter size engine (2.0, 3.0) But usually this information is listed on under-hood sticker. And it will tell you if the valves are adjustable or not. If they are it will give the procedure and clearances.
Hope this helps

follow this link to a renault forum and they will be able to give yuo the info once logged in
05 Renault Espace 1 9 Authentique DCI Engine failure

0.20mm inlet (engine warm)
0.20mm exhaust (warm)

can you please give me the tappet settings on a 4HE1T isuzu NQR 500 engine

What is the tappet clearance on a renault 5 ts 1985 model?

12th inlet 14 exhaust for the valve clearances ,adjust by the rule of nine that is number one down adjust number 8 -----number 2 down adjust number 7 ---and so so so every adjustment adds up to 9 ,simple when you know how isnt it

you are correct ,try 12th inlet and 14 exhaust

The tappet clearence should be in the owners handbook but it's a bit early a tappet noise from the engine (2006) ! Check oil level and change if it's overdue a service is definately worth a look ! Good luck