Stuk camshaft pulley
if that eagle has a 2.0 then your talking about the camshaft gear or is it the crank shaft pulley . then your gonna have to use the gear puller with the two arms and use the thin ones and turn them inside out but if its the small gear just use the two jaw puller and wrap a ratchet strap around the puller to where the jaw puller claws are on snug and use the strap and tighten it down and screw in the center bolt use an inpact wrench just hit the trigger enough to where it gives it a slamming affect . this will jar it lose dont use no hammer .
×