It is in the exhaust pipe.
SOURCE: where is the 02 sensor located for bank 1 sensor
bank one is the left side of the engine, (so the front of the car) sensor 2 is the sensor past the cat. converter. just follow the exhaust coming out of the front of the engine, you will see sensor one from up top (usually) thn sensor 2 will be under car.
SOURCE: crankshaft sensor for vw polo where is the
Crankshaft sensor is located on the right side of the cylinder block behind or under the starter. It is fitted into the rear crankshaft oil seal hausing
SOURCE: HI I GOT A 2000
Forget about the knock sensor.Change ECT/engine coolant temperature/sensor and everything will be OK.Because I do not know the engine code I can.t give you instruction for it.Come back with engine code and I.ll give you step by step instruction.
SOURCE: I'm having a problem with
it could be that the brake caliper on the left hand side is sticking, jack the front of the vehicle up & spin the front wheels by hand & see if one is harder to turn than the other , if they are both the same then it isn't the caliper, check that both tyres are the same brand & tread pattern, this can sometimes make a difference, also tyre pressure, it could also be one of the rear wheels causing the problem, you need to check them to, if all these things are OK you may have to take the vehicle to ma front end specialist to see if they can solve the problem......hope this helps......cheers.
138 views
Usually answered in minutes!
×