Have a Chevy 2018 XR2, on the Infotainment screen, top left, there is WIFI icon, G-4 icon, and a white box with 3 lines at the top right corner, what does this mean?

Question edited for clarity and add maker.
Question moved to model category.

It may need repairing but there is a setting to disable it.

Problems with 2018 odyssey DVD player. : r/HondaOdyssey

Reddit https://www.reddit.com > comments > txddq7 > proble...
Apr 6, 2022 - We have been going through the most ridiculous and annoying process with Honda regarding our 2018 Honda Odyssey DVD player. It just stopped

Faulty infotainment center! : r/HondaOdyssey - Reddit
Dec 19, 2019
2018 Odyssey Blu-ray drive replacement : r/HondaOdyssey
Dec 1, 2021
2018 Honda Odyssey: Repeated failures with CabinWatch ...
Feb 15, 2019
2018 Honda Odyssey DVD player issue - sound but nothing ...
May 25, 2022
More results from www.reddit.com

2018 Odyssey Rear entertainment overhead screen not ...

Honda Odyssey Forum https://www.odyclub.com > ... > 2018+ Odyssey
Jan 25, 2020 - The DVD continues to play; audio works fine. The only thing that isn't working is the overhead screen. Does anyone know if there is a fuse ...

The rear entertainment screen is not displaying the image

JustAnswer https://www.justanswer.com > Honda Questions
Jul 8, 2021 - The rear entertainment screen is not displaying the image from the DVD player. Sound for video is working however.

1 answer · Top answer: Hello, thank you for the question. The first step is to eliminate the possibility of a fuse ...

2018 honda odyssey rear entertainment system not working!

JustAnswer https://www.justanswer.com > Honda Questions
Apr 19, 2023 - 2018 honda odyssey rear entertainment system not working! Just a black screen. It's been dead for a couple of weeks I.

Why is my 2019 honda odyssey rear entertainment system ...

Vehicle History https://www.vehiclehistory.com > questions > why-is-...
Apr 10, 2020 - Some of the most common reasons Your 2019 Honda Odyssey rear entertainment system might not be working are that You may have power disabled ... ..

This question has come up on Fixya before and the issue was the file format as the poster was trying to upload as a .PNG image.

See page 277 of the Owner's Manual for EX and above trims (or page 255 for LX trims). Below is basically what you need:

Requirements:

1. JPEG and/or BMP images.
2. Max dimension per image is 1920 x 936 pixels.
3. Max file size per image is 2 megabytes.

Importing:

1. Load up the images on a USB drive.
2. images must be at the root level of the USB drive.
3. Connect the USB drive to your USB port.
4. Select the clock on the touch screen (upper right hand corner), then select Settings.
5. Follow the menus for importing wallpapers (up to 5 for EX and above, or 255 for LX trims).

..

Follow the link for the info you need. https://seventrumpet.com/where-to-find-2008-2018-lincoln-mkz-factory-keypad-door-code

go to any gm dealer or online search year make and model

in your owners manual

If you have 4 infotainment buttons to the left or right of you wheel, a check mark, a list, a vehicle button and one other, click the top button and watch the cluster, you will figure it out there, use the check mark to reset your mileage. If you do not have these buttons, use the center push stick button on the cluster to reset and twist to navigate through the options. If twisting doesnt work, try pressing the button in to navigate and press and hold tor reset.

Hi,

Basically the wiring of the large harness corresponds to the pins like this.

Starting in the upper right hand corner and working down the right side from A12 down to A1.

1=Left rear output-red
2=Left rear output-blue
3=Right rear output-black
4=Right rear output-yellow
5=empty
6=Left front input-black
7=Left front input-yellow
8=Left rear input-orange
9=Left rear input-green
10=Amp 'ON'-blue&orange
11=empty
12=Amp sensor-black&orange

Back up to upper left hand corner on the large plug

13=Right front tweeter output-red
14=Right front tweeter output-blue
15=Left front tweet output-red
16=Left front tweeter output-blue
17=empty
18=Right front input-red
19=Right front input-white
20=Right rear input-blue
21=Right rear input-red
23=Right front sub (+) output-yellow
24=Right front sub (-) output-black

The small harness is the same above with the upper right position being pin 1 going down to pin 4 then back up to the top for pin 5 down to pin 8.

1=Memory Power-Lrg White
2=Amp Ground- Lrg Black
3=Left front sub (+)output-yellow
4=Left front sub (-) output-black
5=Left front mid (+) output-white
6=Left front mid (-) output-brown
7=Right front mid (-)output-brown
8=Right front mid (+) output-white


Hope this will help you.

Thank you

2004 chevy tahoe 4x4 had the same problem wont turn right at idle - like no power steering , has hydoboost brake steering system , did test and found steering box bad , removed box and remove the top cover on box 4 bolts at hydralic cover and removed and found spool valve has 4 seals 1 outer was blown i replaced box with reman from advance auto about $200.00 and flushed system , drove great problem solved .

1) Turn off the ignition switch while leaving the wipers in the up position. 2) Open the hood and properly secure it in the open position. 3) Gently pull the rubber cowl seal away from the cowl vent screen. Place your hand underneath the right half of the cowl vent screen and lift straight up, thereby releasing the four spring clips and removing the right half of the screen 4) Remove the water shield. Carefully disengage the two water shield locking tabs and slide the water shield toward the front of the vehicle, lifting the water shield up and away from the vehicle 5) Remove the Passenger Compartment Air Filter, being careful not to allow debris or loose components to fall into the filter housing. Replace the Passenger Compartment Air Filter with a fresh filter and reverse the above procedures to reassemble the vehicle components. �
I am not sure what time in the year your 2001 Avalon was built but her is the procedure that I just followed: 1. Open glove box and remove contents 2. Remove the three philips head screws along the top inside frame of the glove box. 3. Remove the hex head bolt in the lower right and Philips screw in the lower left side of the glove box frame. 4. Unlatch the black cover plate from the roof of the glove box. This holds an electrical connection and will need pushed up through the hole when the entire box is removed. 5. Pull on the top left side of the glove box to release the pop tab. Repeat on the right side. 6. Carefully lower the glove box assembly. 7. Disconnect the electrical connection to the trunk disable button 8. The entire glove box can now be removed from the area. The door gear assembly does not come off of the box and is easily damaged if attempted to do so. 9. The Cabin Air Filter assembly has a white cover. Pop the tabs on the right and left side and slide the assembly out. 10. Replace the filter in the assembly. Make sure the airflow indicator points down. 11. Re-Install Air Filter assembly. 12. Re-Install the electrical connections remembering to slide the one through the hole in the top of the glove box. 13. Push glove box assembly on pop tabs. 14. Re-Install screws and bolts. 15. Reconnect the black cover plate to the top of the glove box.
rate it