Should a master cylinder knock and clack when replaced. 2009 dodge journey

SOURCE: 2009 dodge journey...rear brake

If the e-brake cable is attached to caliper the piston is threaded. I use a very inexpensive tool i bought at the parts store . you will need to turn and press the piston at the same time. be aware that the two different sides are threaded oposite of each other.If the e-brake cable is not attached to caliperr the a c clamp should do the job.

Bob Korsu

• 1051 Answers
• Posted on Jan 29, 2011

SOURCE: How to replace the front rotors on a 2009 Dodge

While I could explain what to do, it may be better if you have detailed step by step instructions with illustrations on hand. You can get these free by registering for free at www.autozone.com Once registered you'll have access to a variety of DIY repair manuals.

SOURCE: how to get the spare

its drops down from he outside rear , it shows in your owners manual if you don't have one check here http://www.pdfpedia.com/download/328/2009-dodge-journey-owner-guide-pdf.html

SOURCE: 2009 dodge journey

Dodge Journey owners please go to http://www.change.org/petitions/dodge-journey-s-defects sign and pass along please. Dodge had built and sold this car with defects that they refuse to fix, this is not the kind of quality we should expect.

SOURCE: my 2009 dodge journey won't start, the lights bells and everything else works but all the car does when i try is click

i would check battery connections and test battery. a battery can have a bad cell and run lights but not have enough amps to spin a stater. if everything on battery is good i would suspect a bad starter