2013 Dodge Ram 1500 Check engine light came on, seconds later the engine stalled and I coasted onto the median and turned the truck off. I plugged in a code reader and it gave me this: P1206 $07E8 Manufacturer Control Does anyone know what this could mean or how it’s fixed?

SOURCE: 2001 dodge ram 1500 fault code 1687

Heryou go its a pretty lengthy diagnostic procedure it appears there is a power problem with the instrument cluster here is the code meaning hope it helps have a good dayDB

SOURCE: Engine light comes on - Code shows P0300 and then

OBD II 300 Random/Multiple Cylinder Misfire Detected

When the misfire monitor detects a misfire, it will trigger the check engine light with the specific cylinder number as the last digit in the P030X code. For instance cylinder 1 misfire is P0301, cylinder 2 is P0302 etc. In this case we have either multiple cylinders misfiring, or the computer simply can't determine the specific cylinder, and as such we are left with the P0300 in computer memory.

Possible Causes:

Fuel injectors, related wiring, sensors and computer issues
Running out of gas, or poor fuel quality
Evaporative emissions system (EVAP) concerns: fuel vapors leaking into engine
Incorrect Fuel Pressure
EGR system concerns: leaking EGR valve or restricted ports
Base engine concerns: low compression, valve train problems and timing issues
Ignition system concerns including, but not limited to:
Faulty spark plugs
Faulty coil or related wiring
Ignition module or related wiring issues
Ignition related sensor faults or wiring issues

SOURCE: check engine light on code

This trouble code is Evap Purge System Performance fault. 1) Check for a loose or missing fuel cap. 2) Check for a damaged or missing fuel cap seal. Recheck for other trouble codes. This fault wont cause the stumblering problem. It turns on the MIL lamp to say there leak in the EVAP system.

Sgt Fluffy

• 157 Answers
• Posted on Jun 15, 2009

SOURCE: 2005 dodge Ram 1500 truck 5.7 Hemi check engine lights comes on

Two things you want to know about the check engine light on any vehicle. One is it's an emission warning. The most common cause is a loose gas cap, make sure it clicks when you gas up. Second, is that being an emissions light, is that it'll require some test equipment to find the problem if you checked the gas cap and it's tight. You will want to do that at your friendly Dodge dealer. Why? They'll not only know what it is, it might be fixed free in the emissions warranty which has some parts that are covered longer than the vehicle's regular warranty. The shop on the corner doesn't do warranty work and they're not going to tell you if it might be covered.

SOURCE: 03 Dodge Ram 1500, P0307 code, check engine light

Try this:

Dodge 1995-1999 V8 spark plug wiring.

http://dodgeram.info/tsb/1998/18-48-98/18-48-98-v8.htm