Cars & Trucks Logo

Related Topics:

Shawn Rahl Posted on Mar 16, 2019

I need the 1997 mazda b4000 4WD brake line diagram so I can locate the break in my line on the front, passenger side.

5 Related Answers

Pierre Laplante

  • 2061 Answers
  • Posted on Jan 22, 2009

SOURCE: 1997 Mazda Protoge Thermostat location

follow the top radiator hose to the engine remove the bolts on thermostat housing be carefull removing those bolt not to break them let me know pierre

Ad

Anonymous

  • 142 Answers
  • Posted on Feb 13, 2009

SOURCE: Need diagram for Mazda b4000 brake drum assembly

Okay, then you have what you need. Just take the drum off of the other side and use it as a reference. You are going to have a hard time trying to find a diagram. The Hayes and others are just general pictures and not necessarily what is on your specific vehicle. I do not have that particular diagram myself.
Please remember to rate this fix.

Anonymous

  • 1 Answer
  • Posted on May 09, 2009

SOURCE: 95 mazda b4000 slave cylinder bleeder valve location

the nipple sticks out side the bell housing on the left side just above your hydralic line for your clutch,auto zones web has a complete diagraham and steps for bleeding

Anonymous

  • 1 Answer
  • Posted on Dec 06, 2009

SOURCE: hi in need of a wiring diagram fuse box Mazda bongo

look here: http://www.bongoforum.co.uk/forum/Blah.pl?

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Aug 24, 2010

SOURCE: spark plug wire diagram for

here is the diagram for this truck. just match up the colors and the coil pack numbers to the cylinder colors and numbers.


af77620.gif

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
4answers

Where is the fuel filter ?

1992 Mazda Truck B2200 2.2L 2BL 4cyl the Fuel Filter is located: Under hood, passenger side, front engine area, side of strut tower, mounted in fuel line assembly.

Good luck.
0helpful
1answer

Where is the jack located in a mazda mpv 1997

Under the passenger side front seat beside the tray lock box.
0helpful
1answer

1997 ford escort brake line diagram, more info

If the steel lines are not rusted out and leaking, what are you trying to do or figure out?
I don't think you do know what is the problem is with your braking system?
0helpful
2answers

Brakes are wearing uneven. driver side brakes are engaging but passenger side is not

Either the caliper is bad or there is air in the line.I would pull the wheel off and have someone pump the breaks and see if the breaks try to move then try bleeding them out before I spent the money on a new caliper.
4helpful
1answer

Fuel filter location 97 mazda mpv

Under the hood on the passenger side wheel well. Can be tricky to get at and remove. You will need a 10mm socket to loosen the clamp holding the filter in place, but you will need to undo and remove the fuel lines first. These are under high pressure so it is a good idea to drain the pressure off the fuel system before removing the lines.
3helpful
4answers

Where is the fuel filter located?

Under vehicle, passenger side, below seating area, passenger side of transmission, mounted on frame in fuel line

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
3helpful
1answer

Rear brake lines

run new lines forget about removing old ones,the lines run above fuel tank to block on passenger side,run both lines to left and right rear wheels just make sure they don't interfere with any suspension parts
0helpful
1answer

I have a 1997 mazda protege CV Shaft Bad?

jerking may be the engine mount rubbers are broken causing motor to rock forward and back under power and braking
1helpful
3answers

Break bleeding

try bleeding the brakes as a system. start by making sure the master cylinder is full. then have a Friend step on the brakes and release 3-5 times. the last one they should hold as you break lose the bleeder on the passenger side rear, then do the driver side rear ,(check fluid) next passenger front and then the driver side front do each wheel until you don't see any or hear any air, thats the way i have always bleed brake systems. hope this helps
Not finding what you are looking for?

84 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...