Here is a video showing how to change the knock sensor.
https://www.2carpros.com/questions/saturn-sl2-1999-saturn-sl2-how-to-change-a-knock-sensor
SOURCE: Cam Shaft Position Sensor 1998 Saturn SL
Have a look at this link, scroll to your engine & click on picture to expand for better view.
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528017e904
SOURCE: 1998 Saturn SL not sparking and not starting
1. Test the AC voltage output from the Crankshaft Position (CKP) sensor while cranking at a normal speed. It should produce at least 250 millivolts.
2. Retest the voltage at the Powertrain Control Module (PCM) on the Yellow wire in terminal D13 and the Purple wire in terminal D14.
let me know please thanx i hope it fix
SOURCE: solution for 1998 saturn sl
Hello DTC P0341 & P0133 very common saturn Codes.You need to check condition of Plugs & wires,If not New Replace All Plugs & Wires,also I would replace the #1#4 Coil for the P0341.For the P0133 Reaplce your front O2 sensor with an OEM sensor,not an aftermarket.
SOURCE: fuse box diagram for 1998 saturn sl
There is an interior fuse panel just to the left of the passenger's left knee. The cover It is held on by velcro. After you take off the cover, you will see a diagram on the inside of the cover telling you which fuse is for what. This is covered in your manual, which is in the glovebox. If you do not have a manual you can get one off ebay for a few bucks.
SOURCE: Location of knock sensor on
A knock sensor is threaded into the engine block and is supposed to sense when the engine starts to ping or spark knock and reduces the ignition timing accordingly.The knock sensor is located on the side of the engine.
Important: The larger metal contact area of the knock sensor MUST be toward the engine block. DTC P0327 may result if the sensor is installed backwards. Thanks. Keep updated for
any more query. You can rate this solution and show your appreciation.
Important: The larger metal contact area of the knock sensor MUST be toward the engine block. DTC P0327 may result if the sensor is installed backwards.
Thanks. Keep updated for
any more query. You can rate this solution and show your appreciation.
177 views
Usually answered in minutes!
×