Mazda tribute ground wire to eec is very hotnitsnanno crank no start...?help????

SOURCE: 2001 Mazda Tribute wont start

the problem is probably an idle air control valve. its a cheap fix. the body is ford the motor is mazda.
Luke

SOURCE: HELP!!! 2002 Mazda Tribute ES No Start

I just had this problem, replace the fuel pump and filter.

SOURCE: 2003 Mazda Tribute will start, idle rough for a

check the fuel filter air filter and vacuume lines if they all good make sure the spark plugs are making a bright blue spark

SOURCE: back window wiper won't work ,05 mazda tribute.don't have manual

Start with the basics. could be something as simple as the fuse. I have a 03 Tribute so i guess it is the same model as yours! if so. The fuse can be found in the fuse box in the passenger footwell. There is a small inspection plastic cover in the kick panel. if you un clip the cover, on the reverse side you will find a tool that clips onto the mini blade fuses to extract them (very useful). Also on the reverse side of the cover is a list of the fuses and to what it relates. The rear wiper fuse from memory is approx a 1/4 of the way down the left column of fuses 10A but just confirm on the list. Mini blade fuses are usually coloured but transparent so you will be able to see if the fuse element is still in tact, but always best to double check with a continuity meter. Hope this helps. Simon.

Dana Newcombe

• 1564 Answers
• Posted on Mar 05, 2010

SOURCE: is it hard to change the rear whell bearings on 05

You are probably looking at about an hour per side. Brakes and backing plate must be removed. then the mounting bolts for the axle itself must be removed. this operation should be performed one side at a time in order to save the fluid inside the differential casing. It will become imperative that both oil seals are changed with the bearings. P.S. depending on the graciousness of the engineers, you may not have to remove the backing plates. Thank you, Dana