Valve clearance nissan l 28 motor with zss conversion

is this in Africa TAppets ,are you sure it has this< and is HLA?
what engine is there exactly?, (step 1 to work any engine is. this.
gas/petrol of diesel? engine size. like, 3.0L? V6?
wiki
The 1400 Bakkie was assembled by Nissan in Rosslyn, South Africa (Nissan)

1.4L engine a very small pickup truck and tiny obscure engine
that wiki fails to identify.
buy the manual for NISSAN.
it is not a diesel ,and this list is all 1.4L listed by maker,1.4L and in year range.
GA14DE DOHC, 2 CAMS? AND ROCKERS? 12VVALVES
The GA14DE does not have hydraulic lifters, so special shims are used to adjust the valve clearance.

CGA3DE DOHC, 1,4K Sold as but is 1.348L
data super hard to source on the engine.
one photo shows head cams over valve stems, no tappets at all
see photo, I see bucket lifter there, so are shims.

CR14DE, with vvt

The Nissan CR14DE motor does not have hydraulic lifters, so special valve lifters are used to adjust the valve clearance.

so knowing this engine fact and the exact one makes this more easy

lacking manual or engine name, i'd look first.

CDA3DE, FOR SALE, SEE THE BUCKETS , I DO.

Not all modern engines need you to set the valve clearances. Most engines use oil filled 'tappets' that self adjust the clearance as the oil temperature changes. Depending on which engine it is yours has a lot of the time you can only check the valve clearance but not adjust it.

Valve lash is the end of the rocker arm and the valve stem clearance between. When the engine is running, due to the thermal expansion and contraction, if there is no gap between the rocker arm and the valve stem, rocker arm swells, the top valve open, the impact of engine power and economy. Engine valve clearance will be different, usually when the car is cold, the intake valve 0.08-0.10MM, clearance exhaust valves 0.10-0.12MM Car Diagnostic Tool

Valve clearance on NISSAN E15 (S) Engine - Nissan Forum

www.nissanforums.com/.../49192-valve-clearance-nissan-e15-s-engine.h...

Mar 3, 2004 - 15 posts - ‎6 authors
Does anybody know what is the valve clearance for inlet and outlet for this type of engine? ... Nissan Xterra Forum · Nissan Armada Forum · Nissan Frontier Forum ·Nissan Titan Forum ..... the head so they don't burn up, especially the exhaust valves.Tight exhaust valves are the #1 reason they burn up.

GA14 NISSAN SENTRA model 1988 no rocker arm direct to cam lobes all intake and exhaust valve. what the procedure to adjust the between the camshaft lobes to valve steam.

12 inlet and 15 exhaust is used on most engines unless its a old 60s GT model

What is valve clearance of Nissan TD 25

VALVE CLEARANCE ADJUSTMENT
Application In. (mm)
Intake .010-.013 (.26-.34)
Exhaust .011-.015 (.29-.37)

intake .22 to .28 mm
exhaust .27 to .33 mm
rate me solved...this is all I can find