SOURCE: starter stays engaged
The starter relay on the fender is the most common cause of this condition. ,It is on passenger side feder in the engine compartment, it is round and the positive cable of the battery goes to it,
SOURCE: 96 pontiac grand am 2.4 starter doesnt stay engaged
Check that the flywheel is not missing any teeth. Also check the geartip at the starter where it kicks into the flywheel for wear at the tip.
SOURCE: 1991 mustang 2.3l starter staying engaged
which solenoid did u replace? the one on the starter or the main on up top near the battery, those are the ones that stick closed and keep the starter engaged. here is a picture.
SOURCE: starter does not disengage when starting
you can try and had a shim in between the starter and the flywheel
SOURCE: won't start, starter will spin but will not engage fly wheel to crank up engine
Sounds like the starter drive is shot, best thing to do is replace starter with new or rebuild.
78 views
Usually answered in minutes!
I have replaced both the starter and solenoid on the fire wall and the problem is still there.
×