SOURCE: 1998 toyota camry interior dome light replacement
Look closely at the cover. You will see a small slot. Insert a small flat blade screwdriver, and pry it off. Very easy..
SOURCE: How to replace map & dome light bulbs on a 2008 Ford F-150 Super
2008 Ford F-150 SuperCrew Cab (without moon roof or rails): How to replace the map light bulbs. First, you'll need a "trim pad remover." It is a tool with a screwdriver handle and the metal part has a 'smooth' forked tongue (see Snap-on Stock#: A177A for picture). Go to the center counsel and "gingerly" work around he counsel and pull down at the same time. The counsil is held in by six snap in tongs. It should remove pretty easily. once down, you'll see where the bulbs are. Unscrew and replace. Now, just line up the tongs and gently bump or hit the pressure points (where the tongs are) and it should snap into place. It should take no more than five minutes, tops.
SOURCE: Replace dome light bulb
insert a flay eyeglass scrwdriver in between the plastic lens and base, pry gently , the lens will pop out... u should see the small sections where to insert the screwdriver to pry off the lens
SOURCE: replace dome light bulb 2005 dodge caravan
Have you checked your fuses? If it is not a fuse then take a flathead and gently pry the cover off, remove light and take with you to parts store for replacement comparison, replace light same way other came out and replace cover. Check your owners manual for specific fuse locations.
SOURCE: My headlights on my 1997 Jeep Wrangler will not
I retract my entire solution, having not read correctly your situation. You may simply have lost a body ground wire.????
37 views
Usually answered in minutes!
×