Cars & Trucks Logo

Related Topics:

Jason Wall Posted on Feb 03, 2019

Where is fuse located for Ford falcon 97 xh ute rear tail lights?

  • The Spaminator
    The Spaminator Feb 04, 2019

    Hi Jason Wall, have you looked under the bonnet in the relay plastic compartment ?

×

5 Related Answers

Anonymous

  • 335 Answers
  • Posted on May 09, 2009

SOURCE: i need to know how

If this belt is not used with a tensioner, then you should adjust the belt so you can rotate the belt with your fingers 90 degresses.

Ad

Anonymous

  • 24 Answers
  • Posted on Feb 05, 2010

SOURCE: need a diagram to change rear wheel bearings

if you are looking for a manual for this car, try this link... http://cgi.ebay.ph/Ford-Falcon-Ute-BA-series-Repair-Manual-2002-2005-on-CD_W0QQitemZ170423275380QQcmdZViewItemQQptZAU_Clothing_Merchandise_Media?hash=item27ae04cf74 For twenty bucks you can do it all yourself

Harry Goodwin

  • 365 Answers
  • Posted on Jul 09, 2010

SOURCE: Falcon ute lights go dim at night and battery goes flat.

either your alternator is faulty or your battery is not holding charge
i would check the alternator and the battery and replace either or both

matt8980

  • 2 Answers
  • Posted on Nov 19, 2010

SOURCE: could you tell me where the fuel pump is located

in the tank. easiest way to access is remove the tray

Anonymous

  • 2418 Answers
  • Posted on Jan 15, 2011

SOURCE: Hi I have got a

I did my best to research this problem back the first time I saw it posted. What I came up with is use the computer from the donor engine/car. Your Neutral switch should also come from the donor in respect this switch is found on the clutch in a manual car not on the trans itself as in a auto. The reverse light will also come from the manual trans, and to find which wire is which in transplant car. Use a jumper wire and probe the harness till the reverse lights come on. I can not find a schematic for these cars on the net. Your best bet will be to get a shop manual for both and find the wires there. I hope to have been some help to you.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

Where is the relay for the fuel pump located in a 99 XH Falcon ute

fuel pump relay on ef falcon is located under the header(coolant tank).Fuel pump relay is the green relay,the brown one is the ecu relay.To access these relays,simply undo the 3 bolts holding the header tank in place(no need to undo any coolant hoses),and move header tank out of way,then undo the one screw retaining the relay cover.
0helpful
2answers

I have a 97 ford falcon xh Ute cranks but won't start sometimes kicks over for a few seconds then cuts out replaced ECU and bcm still no go any ideas thanks

that could be wiring issue that the batter isn't able to take up the electricity supplied to it.. u know, the conductor between them..
if possible get a manual from https://www.reliable-store.com/ to fix it urself
0helpful
1answer
0helpful
1answer

Hi, do ford Falcon ute XG doors fit XH?

It covers all under repair manual. I have visited this website 2-3 times for the repair of manuals. They provide all kinds of manuals at a very cheap rates. Check it may be you will get something useful Best Manuals
0helpful
1answer
0helpful
1answer

How do i replace my hand brake cable on my ford falcon XH ute

wait a bit ....is it rear disc or rear drums on that ute

will assume its under dash hand brake pull lever tyoe

the disc setup may have single cables for each rear
rear disk brake cable is approx $ 150

if your XH it is close to the XE and XF set up drums
a complete one line loop cable outer and inner
with plastic grommets along the back chassis rail ( they break )
so the one inner cable works both rear handbrake shoes


hand brake cable is a shorty

undo the adjustment thread
just below the hand brake cable point up somewhere above the gearbox
(drums )
after new cable fitted
drums are adjusted with the old school way with the handbrake adjuster tool
handbrake cable adjusted

then the handbrake handle when pulled out to hold needs14 plus clicks
comes out a long way for some weird reason
on drums
if cable adjustment is done wrong onrear drums the handbrake cable will come loose in the drum as you drive along

26261095-l1jraapkfcyxqeqgczv0cruv-4-0.jpg

26261095-l1jraapkfcyxqeqgczv0cruv-4-3.jpg

26261095-l1jraapkfcyxqeqgczv0cruv-4-5.jpg
0helpful
1answer

I have a 96 Falcon Xh ute. The brake pedal travels

you need to bleed the system

If you need further help, I’m available over the phone at https://www.6ya.com/expert/richard_b59056c0c62ecb00

0helpful
1answer

I need to know how to tension the fan belt on a 1996 xh falcon ute 6 cylinder please can u help me

If this belt is not used with a tensioner, then you should adjust the belt so you can rotate the belt with your fingers 90 degresses.
5helpful
2answers

Ford falcon 4.0 litre fuel injection, backfires when revved up. please send a diagram of the firing order. Also, the timing is out; owners manual suggest that timing can not be set manually

i have a 96 xh ford falcon 4.0 ute.I am rebuilding the engine and delated the pic i had of the timing set up . I am after a pic or a site that i can see where the timing marks should be. I know that the crank of cause is tdc.(key is on top) cam marker is at 3 o'clock (90 degrees from top). Where does the dizzy gear timing mark point to?
Not finding what you are looking for?

527 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...