SOURCE: replace front brake pads on 1988 Nissan Navara Twin Cab utility
It should be a matter of removing the wheel, the caliper and torque
member to get the rotor to come off. There are two bolts that hold the
caliper on the torque member and then another two that hold the torque
member on the spindle hub. Now, the rotor comes off the wheel studs
and you should be there.
Let me know if you need further help. If you need a diagram, I would suggest buying a Haynes Manual from a local NAPA, Autozone, or Checker, or even a Fleet Farm and those will have complete instructions and diagrams for everything on the vehicle and are a great thing to have for every vehicle that you own.
If you have any other questions, please let me know, thanks.
SOURCE: where is fuel pump at Nissan navara pic up year
Fuel pump is usually located inside the fuel tank.
SOURCE: 2002 Nissan Navara will not start after changing battery
dealer only to reset factory immobiliser
SOURCE: Fuel pump problem in 86 Navara
well its located on the frame on passenger side right past the door,under the gas cap its in a bracket.question is it the z24 motor 4 cyc. with 8 plugs?
SOURCE: engine head bolt tension yd25
head bolt torque
step 1 21 ft lbs. or 26 N.m.
step 2 58 ft lbs. or 79 N.m.
step 3 Loosen all bolts
step 4 18-25 ft lbs. 24-34 N.m.
step 5 an additional 86-91 degrees
let me know if there is any thing else i can do for you.
257 views
Usually answered in minutes!
×