Check this out Brendan,watch the video.http://www.mattcastruccimazda.com/blog/how-to-adjust-mazdas-active-driving-display-settings/
Testimonial: "Hey Thomas, thanks but I know how to adjust it, I cant find where to set it once iv adjusted it so it stays in that position. Every time I start the engine it’s back to the default position and brightness. I also have the display reflected onto the windscreen not the older pop up version. Thanks for replying though."
SOURCE: timing belt setting and my car iddle are out of form mazda etude
Your camshaft and crankshaft pulleys have to be properly aligned upon installation of the timing belt. The cogs on the belt, should fit precisely with the teeth of the pulleys. Your # 1 engine cylinder should be moved to "Top Dead Center" before installing the belt. This means no compression once the top of the piston cylinder reaches the top of the chamber.
If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_62314e5b2470e8b5
SOURCE: car won't start
Some thing is not back together correctly. How aout the ground wires on the intake. These are a must. Check for spark and fuel. Hope this helps
SOURCE: I have a 1988 honda accord CX carb. It set for
Clean and tighten your battery posts and connections. Check the starter end and the ground too.
Testimonial: "Great help, got the car started but there's still electrical issues as the battery light keeps fading in and out and tachometer very eradict. thanks"
SOURCE: Lost my main set for
The spare key is the valet key, You can call the dealer and have them cut you new keys for you car. You will need the VIN number and your registration for the car. If it doesn't have chip in it, they can make it for you in a couple of minutes. If it has the chip in it, they will have to order it. Without the chip, the key will cost between $20 and $30 dollars.
49 views
Usually answered in minutes!
×