SOURCE: Camshaft sensor 2009 traverse
did you check your oil level missing 2 liter and more would make that code
SOURCE: How do you change an alternator in a 2012 chevy traverse ls?
Disconnect the negative battery cable. Remove the fan belt, remove the wires from the alternator, take the bolts loose that mount the alternator to the motor and lift it off and replace with a new
one. Follow the reverse of this to replace the new one.
What size engine is in the vehicle, is it a v/6 or four cylinder. If it is a v/6 then the alternator will or should be on the right bank of the engine which in this case will be the back of the engine near the firewall. Let me know.
Testimonial: "Thankyou jerry...but tell me...how do u get to the alternator on this vehicle...can't locate it...don't know if I gotta take the bumper off or the fender wheel well or what? Please help me there's no videos on you tube about it so I'm lost..."
SOURCE: Where is the camshaft sensor located at on a 2009 Chev traverse
Here is a link to the factory service manual it is free, camshaft position sensor is #10 in diagram. http://workshop-manuals.com/chevrolet/traverse_fwd/v6-3.6l/powertrain_management/sensors_and_switches_powertrain_management/sensors_and_switches_ignition_system/crankshaft_position_sensor/component_information/locations
SOURCE: is there a picture of the blend door motor for a 2012 chevrolet traverse lt.
No that's a good question
The sensor that is facing and closer to the front of car will be the intake, while the the farther one will be the exhaust camshaft sensor. ??
2,461 views
Usually answered in minutes!
×