What is the displacement of the engine of the truck dodge d 300 of the year 1964

No year car told nor VIN. sorry they are not all the same.
pulled whole DIZZY? or just wires yanked out ? be more clear.?
300cubic inch engine? INLINE i 6 engine. 4.9L I6 ,modern name
1964-1996 OHV (240, 300, 4.9 L) truck built in Cleveland, Ohio
so the 1964 answer is not same as 1996 , sorry NOT.


the service manual covers that
both ways
crank shaft not set to TDC #1 firing first.
or not.
we stage up the distributor pull first. (rotor mark and 6 wires maked,cap too. with firing order.
or if not done pre-staged the long hard why
4.9L the the below folks YEAR, and win.

https://eautorepair.net/Marketing/Default.asp

The 1961-1964 D-100 was available with the 170 and 225 cubic inch slant 6 engines and 318 cubic inch V-8 engine.
https://en.wikipedia.org/wiki/Dodge_D_series

Same here Diego https://en.wikipedia.org/wiki/M35_series_2%C2%BD-ton_6x6_cargo_truck

Engine Types

6-cyl. 224.7cid/140hp 1bbl

8-cyl. 318cid/200hp 2bbl

Hard to say, could be anything from a 300ci straight 6 to a 460 big block v8.

What year 360 ?

Either a 1.6 Liter 2 barrel carburetor 4cylinder engine with single over head cam found in 76% of that years dodge colts. or it's a 2.0 Liter 2 barrel carburetor 4 cylinder engine with single overhead cam found in 24% of 1974 dodge colts

It all depends on what engine is in the car.

5.0 L or 5.9 L V8or 3.9 L V6 ???

P0300 is a misfire on any cylinder and P3400 is variable valve timing deactivation error. You did not post the make model and year but the 3400 would cause the 300.