Put new starter on 2000 yukon new battery new fuel filter and still wont start sounds like it but it doesnt .alot of people been having this problem is there a simple solution

Marvin

• 85242 Answers
• Posted on Oct 14, 2008

SOURCE: 2000 Ford Expedition wont start

On the engine there is a tube that supplies fuel to the fuel injectors, on that tube there is a valve, like a metal tire valve, this is the fuel pressure test port, you will need a special guage to check the pressure that screws onto that valve, Kragen and other parts stores sell this test kit, it is very inexpensive, about $20.00, but cheaper than having a shop do it for you, if you do the test and you have no pressure while cranking the engine then your fuel pump is bad, the pump is in the gas tank, a big job and dangerous due to chance of fire if you are not cautious.

SOURCE: 1999 Yukon cold start problems.

1999 Yukon Start Issue - I have replaced the octopuse, battery, fuel filter, fuel pump, still having problems starting in cold weather, sometimes after a heavy rain.

Any suggestions?

Thanks

SOURCE: wont start

sounds like your not getting power to the starter. check the connections on the battery and the starter to see if any thing is loose. if not you could try taking off the starter, and taking it to a part store and have them test it.

SOURCE: 1990 mercedes 190e wont start, new battery, new fuel filter help

i see, we ask for help and you want to charge us for it. But if we have solved the problem, you want us to tell you how we did it. Well my time is valuable too, i figure it took me about three hours to figure out the problem and fix it, at my hourly rate of $100 an hour, yes i am a business executive that works on his own cars, it will cost you $300 for the answer.
Thanks,
Ifixumtoo

SOURCE: 1995 FORD EXPLORER 4X4 6 CYL 4 DOOR WONT START

Fords have inertia fuel cut off switch. You need to check that first. If you dont have fuel. If you have fuel and no spark you need to check for inj pulse to injector. Make sure no fuses are blown. If no spark and no injector pulse then replace cranksensor.