The cruse control does not engage when I turn it on, neither does the light come on indicating that the on button has been pressed to indicate the attempt to engage the cruse control! I drive almost all of the time with my cruse engaged!
SOURCE: Hyundai Overdrive wont engage
It is not suggested strip and twist wires. Better take it to an authorized service station to check what causes the problem.Is it OVERDRIVE SWITCH or CRUISE CONTROL MODULE faulty?
Over drive switch has three points. (5 to 4 selects "ON" or 5 to 6 selects "OFF").
Right click on following schematic, "save picture as" to a location in your PC so you have a ZOOM IN view.
CRUISE CONTROL SYSTEM SCHEMATICS
SOURCE: Cruise control indicator light flashes on-off but cruise will not set
check the linkage on throttle body area
SOURCE: 05 f150 4x4. 4 wheel drive lights come on but it is not engaged?
change actuator in front hub water gets in there freezez and ruber seal rips part only 120.00 bucks not hard to change beat upper ball joint take of spindle nut think it was 5/8 3 bolts in back should fall out
SOURCE: 2007 GMC Yukon Cruise Control
Check the speed sensor. Look up the location at autozone .com or google. It is either near the tranny or at the passenger side wheel. The speed sensor is almost always connected to cruise control problems.
92 views
Usually answered in minutes!
×