2003 honda pilot camshaft sensor can it be replace without removing the timimg belt.?

SOURCE: 2003 Honda Pilot Rear door lock not working

I have a 2004 honda pilot.The passinger door and the back door behind the driver seat will not lock or unlock with remote or with door lock switch,What can I do to fix it?

SOURCE: 1996 HONDA ACCORD CRANKSHAFT SENSOR AND CAMSHAFT SENSOR.

befor in the ealier models of accords they use to be both the cam and crank sensors in the distibutor but they separated them !!!So no they are not together on your car tha cam sensor is in the distributor and the crank sensor is in front of engine or in the lower timing belt cover if it is in the timing cover you can see a wire going dow the timing cover way to the bottom on the rear side off it

hope it will help you if you have any question just wright back !!!!



Denis

SOURCE: 2003 honda pilot right rear door lock does not

if all others are working properly you are most likely having a problem with the door lock actuator in that door

SOURCE: how to replace cabin air filter in 2003 pilot

Step 1 Take everything out of the glove box on the passenger side. Squeeze the black clips on either side of the glove box interior to free it from its retainer and pull it toward you. It will glide forward on hinged arms. Lower it as much as possible so it's out of your way.

Step 2 Identify the gray plastic bar that runs from left to right across the bottom of the glove box opening. This is a piece of plastic molded to the rest of the glove box assembly, but it covers up a removable bar that is mounted directly in front of the cabin air filter case. You'll have to cut this plastic bar off with a razor knife to proceed. Fortunately, this isn't too difficult; just cut carefully and steadily, and make your cuts as close as possible to the ends of the bar.

SOURCE: camshaft position sensor on a 2003 ford taurus, how to replace

Need a repair shop to test the sensor

A sensor code doesn't mean the sensor is bad
could be the cam sprockets stick

Your best off with the use of professional test
tools for diagnosing that

Look at some you tube video on the subject
for your car & engine size