I have a 2011 dodge caravan. Engine light and traction light come on. Hard start. Turn off start it again just check engine light stays on. Start it a few more times all warning lights go away. Code was saying cam shaft sensor. They were replaced. Warning lights still turn on and off. Also transmission jolts while driving or park to drive or reverse to drive. What is causing this?
SOURCE: Emissions warning light on Renault Grand Scenic II, 2004 1.5 DCi
i have a renult scinic 2004 1400cc emissions warning light on running uneeven and loss of power can this be sorted out what is it
SOURCE: warning lights staying on after engine started
probably the shuttle valve in the ABS unit is defective, solution renew shuttle valve, dont let dealership sell you a new ABS unit very expensive
SOURCE: 2005 Dodge Stratus ? Camshaft Position Sensor causing problems (I
I had the same problem with my '05 Stratus SXT 2.4 DOHC. I've replaced the cam pos sensor and it seems to be running fine right now. On the Dodge forums a lot of the guys say that you need to replace the crank pos sensor too. I've bought one of those just in case it comes back again. Hope this helps.
SOURCE: battery light comes on while driving with a loss of power?
Have your battery checked to make sure it does not have a bad cell, have your alternator checked to make sure it is putting out a full charge to your battery. Sometimes the ASC light is activated wen there is an engine issue that does not have it's own code.You may also wish to have your parking lamps checked to make sure your lamp connections do not have worn wire covers that may be grounding out.
SOURCE: 2006 Chevy HHR Traction Control Light and Check engine
i fixed mine by pulling each and every fuse in all the fuse boxes and replacing them with new ones. the hhr fuses have a tendency to work loose and cause all kinds of little problems. i searched the forums for the answer to the traction control light problem and never found an answer that worked until i talked to a "shade tree" mechanic in my area and he told me to do the fuse thing. been a month now and no more problems.
Testimonial: "The comments I left are the solution. The fuse thing does not do anything. It's a red herring. I replaced only the one that's associated with P0010 and It's been months."
1,061 views
Usually answered in minutes!
×