At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Change the speed sensor if you have the electronic speedometer. If you have a cable driven speedometer, buy a new cable, and replace the old cable if it has been broken.
the cam sensor on the vortec engines are just a three wire pickup located underneath the distributor rotor need a t10 and a t15 torque bit usually the pick up module also has to torque bit screws in it same size
neoprene gear in transmission were the speedometer cable goes into transmission should not have a dished appearance if you pulll it out of transmission look at it from the side it should appear flat from the start of the gear to end of gear no dish down in center
What I had to do when I did mine was to lightly press on the speedometer while driving a short distance till the cable lined up. You should feel the speedometer fall into place and it should start working. Make sure to do this where there's no chance of hitting anything.
THE SPEEDOMETER CABLE GOOD AND SPEEDOMETER NOT WORKING.2 POSSIBLE CAUSES WHILE ITS NOT WORKING SPEEDOMETER GAUGE BROKEN OR SPEEDOMETER DRIVE GEAR IN EXTENSION HOUSING BROKEN.
If your speedometer is not electronic, unfasten the speedometer cable from the back of the dashboard instrument assy. Replace the odometer & speedometer unit with another one. Reconect the speedometer cable. This should do the trick.
This is not specific to a Chevy, but the speedometer cable generally is held in place with either a threaded nut or a retaining clip. Pulling on it will just cause damage. Disconnect it from the speedometer and feed the cable through the grommet in the firewall.
×