Cars & Trucks Logo

Related Topics:

Rockey Clark Posted on Dec 12, 2018
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

What all do I have to remove to take off the alternator bracket on a 2004 hyundai accent 1.6L

1 Answer

Here2HelpYou

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Master:

An expert who has achieved Level 3.

  • Hyundai Master 592 Answers
  • Posted on Mar 18, 2019
Here2HelpYou
Hyundai Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Master:

An expert who has achieved Level 3.

Joined: Nov 10, 2018
Answers
592
Questions
0
Helped
152864
Points
4122

Remove the belt, alternator, and the mounting bolts that thread into the engine block/head!

5 Related Answers

Anonymous

  • 21 Answers
  • Posted on Jul 02, 2008

SOURCE: V6 2002 Hyundai Sonata - How to Remove Alternator?

It comes out through the bottom, lower the rear of the frame and remove the passenger half axle shaft to remove, sorry.

Ad

Anonymous

  • 1990 Answers
  • Posted on Jan 24, 2009

SOURCE: need to remove window crank 2004 hyundai accent

Your Local Auto Parts Store has the Tool that you need for this Removal. Some of them will let you Rent it instaed of paying the 50.00 Bucks for the Tool.

Anonymous

  • 1 Answer
  • Posted on May 22, 2009

SOURCE: how do you remove radio from hyundai accent 1998

You have to take out the ash tray, and remove those two screws, then pop out the center dash trim. Careful, though, you have to take out a lot of the wiring inside of your center dash trim in order to pull it out for enough room to move the radio in and out. I'm doing this right now, actually..

Anonymous

  • 69 Answers
  • Posted on May 27, 2009

SOURCE: changing timing belt on 2004 hyundai accent

Sign up for an account on hmaservice.com. Once you do so, log in and click on "Shop". You can then enter your year/make/model and you will find the info under, engine mech. system>timing system>timing belt>repair procedures. Very detailed, and best of all, FREE.

Anonymous

  • 58 Answers
  • Posted on Jun 09, 2009

SOURCE: How do I change an alternator belt on a '99 hyundai accent?

Call your local National Guard Armory, Fire Station, State College auto program or High School Auto Shop and ask if they have somebody that would come put it on for you. Ask you pastor who the "auto guy" in the church is, if you don't have a church call the biggest church closest to you and ask the receptionist if they have an "auto guy" that would help you. The local senior center or VFW hall have "auto guys" . If you were within 50 miles of 83501 I'd come do it for you.


Removal & Installation Raise and support the vehicle.

    Remove the engine splash shield.
  1. Rotate the drive belt tensioner clockwise to release the drive belt tension.
  2. Remove the drive belt from the alternator.
  3. Slowly release the drive belt tensioner.
  4. Remove the drive belt from the accessory drive pulleys.
To install:
  1. Install the drive belt to the accessory drive pulley.
  2. Rotate the drive belt tensioner clockwise.
  3. Install the drive belt to the alternator.
  4. Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.
  5. Slowly release the drive belt tensioner
  6. Install the engine splash shield.
  7. Lower the vehicle.

It's O.K. to ask for some help.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why my hyundai accent 2005 sometimes **** when idle

Need more info. Did your car starts again, if check engine Leigh is ON,your tuneup is good,alternator charging?
please post more info
0helpful
1answer

Accent broking timing belt now misfire 1&4

Lift the vehicle by using of jack.
Remove the engine support bracket.
Remove the power steering belt.Remove the air conditioning compressor belt.Remove the alternator belt
Remove the coolant pump pulley.
Remove the crankshaft pulley.
Remove the timing belt cover.
Move the timing belt tensioner pulley toward the coolant pump and temporarily secure it
.Remove the timing belt
Remove the camshaft from the camshaft sprocket
Remove the crankshaft sprocket and flange.
Remove the timing belt idler.
Remove the timing belt tensioner.

re install in reverse order. chances are the rod is bent but without breaking down the cylinder the only way to determine is to but a new belt on and see what happens. good luck.
0helpful
1answer

W/shield washer reservoir replacement on 2007 Hyundai Accent

if the same design as 2004 Accent then just remove right front wheel, slide underneath, and start wrenching on it. should be 2 or 3 bolts
0helpful
1answer

How difficult is it to replace an alternator on a 2002 hyndai accent

Here's an illustration: Disconnect negative battery cable. remove radiator fan (next to alternator). Loosen upper alternator tension bolts & tilt/move toward engine to give slack to the drive belt. Remove drive belt & then remove lower alt mounting bolt & top tension/mounting bracket bolt. Disconnect alternator wiring/connections. Lift alternator out. Assembly is in reverse order of removal.


ghost45_52.jpg
0helpful
1answer

1999 Hyundai accent. Battery discharges due to 1.25 ma current that is still present with all fuses removed. What circuit is not fused?

Hi,
One place to look is the alternator. There are diodes in the alternator that occasionally short out to ground. Take off the hot wire on the alternator and retest amperage draw. No fuse in that circuit.
Wayne
0helpful
1answer

How to take the alternator off?

I did this recently on Hyundai Accent. First things first is to disconnect the battery to prevent any contact that can produce sparks during the disconnection of the positive (+) supply of the alternator 1. Jack up car. Remove splash guards from bottom. 2. From bottom loosen pivot bolt. 3. From bottom disconnect cables. 4. From top loosen adjustment bolt and slacken belt. 5. Remove belt from pulley and remove adjustment bolt. 6. From bottom remove pivot bolt. 7. Alternator may have corroded to mounting bracket so work it loose. 8. Find out alternator will not slide out of engine compartment. 9. Loosen radiator mounting bolts. 10. Shift radiator to side to make more room to get alternator out. 11. Install alternator. 12. Put radiator back in its place.
I guess it depends on what year... I too just did an alternator on a 2001 Accent. First, and what the previous forgot, disconnect the negative battery cable. Steps 1 thru 5 are exact. Step 6 is where we differ. 6. From bottom, push alternator up and out of mounting slot, gently work it down and out. 7. The pivot bolt can then be punched out (my bolt had a center mark where a punch would stay, so not to damage the threads) and then put into the replacement. Re-assemble in reverse order.
Last night I did this repair on 1999 accent. a 10mm and 12mm sockets and end wrenches are needed. After trying to wiggle the alternator up through the top, I was afraid of damaging other electrical connections, so I took the oil filter off. It was time for an oil change anyway, but just removing the filter only lost maybe half a quart of oil. The local autozone had an alternator for 129.99, lifetime warranty.


3helpful
1answer

I looking for the location of the crank sensor hyundai acccent 2002 1,6L

The crank sensor on this 2000 hyundai accent is located on the leftside of engine near the rear exhaust manifold.this is if your standing on the driverside looking at the engine your left is the side the front is on, hope this helps, heres a picture to help you.abcbb01.gif
3helpful
2answers

How do you replace fuel filter in 1999 hyundai accent

there is a small black canister on the firewall first take the fuel cap off to release pressure then crack top nut with 19mm socket and undo bottom with 14mm spanner release bracket with 10mm socket and slide it straight then put it back in the way you took it out just beware of the brass washers
0helpful
1answer

How do i take an alternator out of a 1996 hyundai accent?

1st thing is disconnect battery earth/negative lead make sure you know radio code if needed ? then slacen polt that adjuster slide connects to engine then remove adjuster slide bolt the one thatscrews into alternator now unplug socket/wires from rear of alternator having done these the alternator drive belt off ?you are best to remove alternator complete with its mounting bracket which is secured by two bolts to engine block hope this helps
0helpful
2answers

How do I replace headlamp bulb?

Some imports require the entire light assembly to be removed in order to replace headlamps. Look to see if there are angled rods on the back side of the light assembly. If so, see if the can be pulled straight up towards the hood of the car. When they are released the headlight will be able to come forward. Good luck. Hope this helps.
Not finding what you are looking for?

207 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...