SOURCE: nissan murano 2005 sl keyless entry remote programing
Close all vehicle doors, LOCK doors using drivers side switch.
Insert key all the way into the ignition, (do not turn) remove key.
Repeat this step 5 times. (6 total)
Hazards should flash to indicate program mode.
Press any button on transmitter to be programmed, hazards should flash to indicate successfull program.
*For additional remotes, cycle drivers door lock UNLOCK, LOCK, press
any button on remote, hazards should flash. Repeat step as necessary.
Ignition ON, (engine off) ignition OFF, UNLOCK using drivers side switch, test remotes.
Source
SOURCE: keyless entry for 05 Kia Sportage
i have a kia optima my keyless quit working to.I took it back to the dealer and the said it was common on a lot of kia models.They replaced the module for the keyless remote,that seams to have fixed it.
SOURCE: How do i program remote keyless entry?
You don't normally program a keyless entry, that's done for you by the technicians that install that. If the replaced battery doesn't solve the problem, take the battery and the remote to the techies that installed it.
SOURCE: '03 Hyundai Elantra - Keyless entry remote not working
It wouldn't be the car battery, but since you just purchased the car, the dealership should correct the problem. Bring it to their attention right away. Did you get any kind of warranty? Most dealers have at least a 30 day warranty for things like this.
SOURCE: keyless entry remote quit working. Just purchased
Transmitter Programming
Notes
Transmitter Programming
451 views
Usually answered in minutes!
And I noticed the trunk light on dash now after disconnected the battery over night
Ok so any one that seems to have some of these problems check your D/clock fuse location is in cab driver side in my 2005 Hyundai sonata 4 banger 16 valve 5 speed power windows caralarm
×