Whats involved with programming a 2005 hyundai tucson ECU

SOURCE: How do I remove rear rotor from 2005 hyundai

What you have to do is first remove the screws that hold the rotor on to the hub, let off the hand brake shoes(they are located inside the rotors) there is a rubber plug on the face of thr rotor, take that off and loosen the hand brake adjuster! remove the brake caliper and caliper carrier and the rotor should come off! hope this helps

SOURCE: My washer fluid isn't working on my 2005 Hyundai

The fuse for the washer fluid is in the fuse box under the hood on teh drivers side.... There should be a diagram that will show you what fuse exactly.

SOURCE: how many bolts on the thermostat housing?

should just be two bolts, one on each end of the housing

wayne

• 364 Answers
• Posted on Jan 19, 2010

SOURCE: How do i remove the front bumper on a 2005 Hyundai

Please leave 4 thumbs up for this answer.
Under the fron wheel arches remove the retaining screws that attach the splash shields to the bumper, Also remove the 2 screws under there that secure the bumper to the corner of the car panel. Remove the grill and supporting clips that attach the bar to the reo {reonforcement} underneath, remove the screws securing the stone shield panels to the bottom of the bar. If you have flood or spot lights, ensure their mountings are free from attaching between the plastic cover and the reo. The cover should pry away with very little force if any. Hope this helps you, safe driving.

Testimonial: "very helpful, Thanks"

SOURCE: 2005 Hyundai Tucson v-6 4wd.

There are several dozen codes to the engine emissions system. From minor (gas cap loose) to major (ECM failure) Some senosrs can be bad and the engine runs fine, but you can loose 10, 20% fuel economy. You need to have the codes read. parts store do it for free. But don't buy a part just for the code. It could be something else causing the code to pop. Let me know.